Supply HYDAC hydraulic oil filter element 1253041

Supply HYDAC hydraulic oil filter element 1253041

Application areas of 0060D005BH4HC/- V replacement filter element:

Metallurgy: Used for filtering hydraulic systems of rolling mills and continuous casting machines, as well as filtering various lubrication equipment

Petrochemical: Separation and recovery of products in refining and chemical production processes, purification of liquids, purification of magnetic tapes, optical discs, and photographic films in manufacturing processes, filtration of dust particles from oilfield injection water and natural gas.

Textile and packaging: Purification and uniform filtration of polyester melt in wire drawing engineering, protective filtration of air compressors, and oil and water removal of compressed gases.

Electronics and pharmaceuticals: pre-treatment and filtration of reverse osmosis water and deionized water, pre-treatment and filtration of cleaning solution and glucose.

Thermal and nuclear power: purification of lubrication systems, speed control systems, bypass control systems for steam turbines and boilers, purification of feedwater pumps, fans, and dust removal systems.

Mechanical processing equipment: lubrication systems and compressed air purification for paper making machinery, mining machinery, injection molding machines, and large precision machinery, dust recovery and filtration for tobacco processing equipment and spraying equipment.

Industrial oil products: such as hydraulic oil Transformer oil Turbine oil. Refrigeration engine oil Lubricating oil. During the use of fire-resistant fuels, impurities such as mechanical impurities may be mixed in due to various reasons Impurities such as water and air can accelerate corrosion, increase mechanical wear, reduce work efficiency, deteriorate oil products, shorten equipment service life, and in severe cases, cause oil blockage and production accidents.

The return oil filter is used for precision filtration of hydraulic system return oil, filtering out metal particles generated by component wear and rubber impurities caused by seal wear in the hydraulic system, and keeping the oil flowing back to the tank clean

The magnetic oil return filter is a new product specially designed by our company based on technical data and specific requirements of our customers. Only a small part of the filter head connection is exposed outside the oil tank, while the rest is inside the tank, simplifying the system pipeline, making installation convenient, and the system arrangement compact and beautiful. In terms of structure, we have improved the huge structure of the original pipeline oil return filter. Considering that the hydraulic system still produces a large amount of ferromagnetic pollutants, before the return oil fine filtration, it is first subjected to strong magnetic filtration and then to secondary fine filtration. This type of filter is equipped with a filter element pollution blockage transmitter and an oil circuit bypass valve. When the return oil pressure reaches 0.35MPa, the transmitter sends a switch signal or alarm. The return oil pressure value can also be directly read from the transmitter dial to prompt the operator to replace the filter element in a timely manner and ensure the cleanliness of the system oil. To replace the filter element, simply unscrew the filter end cap. When the return oil pressure rises to 0.4 MPa, the bypass valve inside the filter automatically unloads to avoid excessive return oil pressure causing poor performance of the entire system.

Supply HYDAC hydraulic oil filter element 1253041