Steel aluminum fully enclosed drag chain

NegotiableUpdate on 01/20

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Brief description: Steel aluminum fully enclosed drag chains are generally used for traction and protection on cables, oil pipes, air pipes, water pipes, and air ducts in machine tools and machinery. Steel drag chains are divided into three types based on their usage environment and requirements: bridge type steel drag chains, fully enclosed steel drag chains, and semi enclosed steel drag chains.

Product Details

Steel aluminum fully enclosed drag chainSeveral points must be noted during use:

1.TLGandTLThe usage stroke of the steel drag chain is40Mi, suitable for all transmission modes. Can be extended or shortened at will. In addition, the bending radius can be changed by changing the pin axis. The bending radius should be selected according to the diameter of the cable and should reach the diameter of the cable10For smaller trips, a smaller radius can be chosen accordingly.

2.The width of the support plate for the steel aluminum drag chain is150mmto800mm,The distance between holes is10mm.The height of the chain plate, which is also the height of the support plate, is determined by the diameter of the cable.

3.When the machine tool is operating at its limit, if the width of the steel drag chain exceeds300mm,The length of the drag chain exceeds4mFor stability reasons, it should be considered to choose a drag chain with an increased size of one size.

Steel aluminum fully enclosed drag chainSelection principle

1According to the aperture of the support plateDmaTo determine the height of the chain platehgAnd the model of the drag chain.

2Inner cavity aperture of support plateD1=dapproximately equal to0.1d(Take an integer). among whichd=The outer diameter of wires, cables, liquid and gas hoses.

3Determine the bending radius of the support plate type drag chain based on the functional requirements of the drag chain:

1）When the size of the pipe joint of the cable is larger than the inner hole diameter of the support plate or requires frequent disassembly, maintenance, etc., a separate type support plate can be selected;

2）When the drag chain needs to bear a large load of pipes and cables, a high-strength support plate type should be selected-Whole block design;

3）When there are many specifications and varieties of cable installation, frame type support plates can be used.

4When the use of machine tool drag chains is restricted or affected by the environment, steel strip protective support plates need to be used.

5Determine the width of the support plate based on the number of installed cablesb1,Thus, the width of the drag chain can be determinedB.