Bridge type steel aluminum drag chain

Bridge type steel aluminum drag chainThe main body is composed of a chain wrench(High quality chrome plated steel plate)Support plate(Extruded aluminum alloy)pin(alloy steel)Composed of various components, the cable or rubber tube and the drag chain do not produce relative motion or twisting deformation. The chain plate is chrome plated with a novel and reasonable appearance, and the structure is flexible and strong,Steel resistance without deformation, easy installation, and reliable use,Easy to disassemble and assemble, especially with high-strength wear-resistant materials and alloy copper as the shaft pin, the product's wear resistance is improved, bending is more flexible, resistance is smaller, and noise is reduced, ensuring long-term use without deformation,Not sagging.

1.The drag chain can adapt to the speed of movement40rice/Divide.

2.When the drag chain moves at a speed, the noise pressure level is not greater than68Decibel.

3.The safe service life of the drag chain shall not be less than100ten thousand times(reciprocating).

Bridge type steel aluminum drag chainAccording to structure, it can be divided intoTLSteel drag chains andTLGSteel drag chain.

steel drag chainAccording to the form of the support plate, it can be divided into integral type (perforated type), vertically separated type, and frame type (isolation plate type).

steel drag chainClassified by pitch, there are45、65、95、125、180、225、250Type. The width of the drag chain can be customized according to user requirements, and the bending radius ranges from50-800between.

steel drag chainThere are three forms of support plates.
（1）When the drag chain needs to bear large pipe and cable loads, high-strength support plates - integral type should be selected
（2）When the size of the pipe joint of the cable is larger than the inner hole diameter of the support plate or requires frequent disassembly, maintenance, etc. Optional support plate - separate type
（3）When there are many specifications and varieties of cable installation, a support plate frame type can be selected.

steel drag chainSeveral points must be noted during use:

1.TLGandTLThe usage stroke of the steel drag chain is40Mi, suitable for all transmission modes. Can be extended or shortened at will. In addition, the bending radius can be changed by changing the pin axis. The bending radius should be selected according to the diameter of the cable and should reach the diameter of the cable10For smaller trips, a smaller radius can be chosen accordingly.

2.The width of the support plate for the steel aluminum drag chain is150mmto800mm,The distance between holes is10mm.The height of the chain plate, which is also the height of the support plate, is determined by the diameter of the cable.

3.When the machine tool is operating at its limit, if the width of the steel drag chain exceeds300mm,The length of the drag chain exceeds4mFor stability reasons, it should be considered to choose a drag chain with an increased size of one size.