Specialized drying equipment for soybean residue

Specialized drying equipment for soybean residueWorking principle

Hot air enters the mixing and crushing drying chamber from the bottom of the dryer at a suitable spraying speed through the inlet pipe, which granulates the material and enhances mass and heat transfer. At the bottom of the dryer, larger and wetter particle clusters are mechanically sheared, blown, and rotated by the agitator, causing the material to be slightly crushed by centrifugation, shearing, collision, and friction. Particles with lower moisture content and smaller particle size are carried up by the rotating airflow and further dried during the ascent process. Due to the rotating flow of gas-solid phases, the inertia of the solid phase is greater than that of the gas phase, and the relative velocity between the solid and gas phases is higher, which enhances the mass and heat transfer between the two phases. Therefore, the production intensity of this machine is high.

Specialized drying equipment for soybean residuecharacteristic

1. Due to the material being subjected to centrifugation, shearing, collision, and friction, it is finely dispersed into a highly dispersed state, and the relative velocity between the solid and gas phases is high, which enhances mass and heat transfer and increases the production intensity of the machine.
2 ． The dry gas enters the bottom of the dryer, generating a strong rotating airflow that has a strong flushing effect on the material on the wall, eliminating wall sticking.
3 ． In the high-temperature zone at the bottom of the dryer, thermosensitive materials do not come into direct contact with the hot surface and are equipped with special devices to solve the problem of coking and discoloration of thermosensitive materials.
4 ． Due to the high circumferential gas velocity in the drying chamber, the material retention time is short, achieving high efficiency, speed, small equipment, and large production.
5 ． Installing ceramic analyzer rings and swirl plates on the upper part of the drying chamber can control the particle size and humidity of the outlet materials to meet the requirements of different final moisture particle sizes for different materials.

Our company has flash drying machine prototypes and in stock all year round. We welcome new and old customers to call and visit our factory for on-site inspection. Material testing machine!