-
E-mail
Sales@dulinmachine.com
-
Phone
13817824596
-
Address
Room 303, Building 4, No. 26 Hangji Road, Hangtou Town, Pudong New Area, Shanghai
Product Categories
Shanghai Dulin International Trade Co., Ltd
Spanish Gaimo hydraulic tapping machine
NegotiableUpdate on 05/17
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Introduction to Tapping Capability (Metric Standard Coarse Thread): M2-M30 British Standard Thread (Coarse Thread): BSW 3/32-1 '1/8 British Standard Pipe Thread: BSP 1/16-1' 1/8 Thread Accuracy: 6H Tapping Material Tensile Strength: 120 Kg/mm2 Tapping Material Brinell Hardness: HB 352 Tapping Material Rockwell Hardness: HRC 37 Tapping Direction: Vertical
Product Details
Gamor hydraulic tapping machine RHG-2B (M3-M30)
 RHG-2B M3-M30 MT-2B M3-M30 | technical indicators(model): | RHG-2B M2-M30 | MT-2B M2-M30 |
| Tap capacity(Metric standard coarse teeth): | M2-M30 | M2-M30 | |
| British standard thread(coarse teeth): | BSW 3/32 - 1' 1/8 | BSW 3/32 - 1' 1/8 | |
| British standard pipe thread: | BSP 1/16 - 1' 1/8 | BSP 1/16 - 1' 1/8 | |
| thread accuracy: | 6H | 6H | |
| Tensile strength of materials that can be attacked: | 120 Kg/mm2 | 120 Kg/mm2 | |
| Brinell hardness of materials that can be attacked: | HB 352 | HB 352 | |
| Rockwell hardness of materials that can be attacked: | HRC 37 | HRC 37 | |
| Tapping direction: | vertical | Vertical/level/any angle(Wanxiang) | |
| 1Low speed gear: | 22-105r.p.m. | 22-105r.p.m. | |
| 2High speed gear: | 130-630 r.p.m. | 130-630 r.p.m. | |
| 1Low speed torque: | 359.89 Nm | 359.89 Nm | |
| 2High speed torque: | 125.31Nm | 125.31Nm | |
| Hydraulic pressure: | 140 bar(Kg/cm2) | 140 bar(Kg/cm2) | |
| variable frequency motor: | 3 CV 50Hz3 | 3 CV 50Hz | |
| electricity press: | 380Vthree-phase50Hz | 380Vthree-phase50Hz | |
| speed control: | Variable frequency drive with stepless speed regulation | Variable frequency drive with stepless speed regulation | |
| scope of work(radius): | 1410mm | 1410mm | |
| scope of work(diameter): | 2820mm | 2820mm | |
| Workbench length, width, and height: | 900X630X | 900X630X | |
| Quick change chuck interface diameter: | 31mm | 31mm | |
| Oil storage capacity: | 40L (liters)ISO VG-46） | 40L (liters)ISO VG-46） | |
| Machine weight: | 475Kg (kg) | 475Kg (kg) |
| RHG-2B M2-M30 | Standard configuration | |
 | 1 Parallel tapping force arm(3section)Hydraulic motor | |
| 2 900*630* | ||
| 3Tap forward and reverse speed independent speed control keys. | ||
| 4Hydraulic device(hydraulic pump). | ||
| 5**Tap torque adjustment valve. | ||
| 6Digital display of tap forward and reverse speed | ||
| 7Left, right(Forward and Reverse)Tap conversion key | ||
| 8High speed and low-speed conversion key | ||
| 9Hydraulic pressure regulating valve(switch) | ||
| 10Hydraulic pressure gauge(table) | ||
| 11Emergency stop switch | ||
| 12The groove for placing the clamp head | ||
| 13Oil temperature display | ||
| 14Hydraulic oil gauge | ||
| 15Control key of cooling tap | ||
| 16Adjustable height footrest | ||
| technical indicators(model): | RHG-2B M2-M30 | MT-2B M2-M30 |
| Atall | 1800mm | 1800mm |
| Blow | 680mm | 680mm |
| Crise and fall | 550mm | 550mm |
| Dadjust up and down | 190mm | 190mm |
| ESliding range | 570mm | 570mm |
| FUp and down itinerary | 350mm | 350mm |
| R1Working range radius(diameter): | 350mm( | 350mm( |
| R2Working range radius(diameter): | 1060mm( | 1060mm( |
| R3Working range radius(diameter): | 1410mm( | 1410mm( |
 | ||
