Hydraulic tapping machine RHG (M24)

NegotiableUpdate on 05/17

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

A brief introduction to Gamor hydraulic tapping machine: metric standard (coarse teeth): M2-M24. Tensile strength of the tapping material: 120KG/MM2. Brinell hardness of the tapping material: HB 352. Rockwell hardness of the tapping material: HRC 37. Tapping direction: vertical

Product Details

Gamor hydraulic tapping machine:

RHG-M3-M24RHG-M2-M20RHG-M2-M16

technical indicators(model):	RHG-M3-M24	RHG-M2-M20	RHG-M2-M16
Tap capacity(Metric standard coarse teeth):	M3-M24	M2-M20	M2-M16
thread accuracy:	6H	6H	6H
Tensile strength of materials that can be attacked:	120 Kg/mm²	120 Kg/mm²	120 Kg/mm²
Brinell hardness of materials that can be attacked:	HB 352	HB 352	HB 352
Rockwell hardness of materials that can be attacked:	HRC 37	HRC 37	HRC 37
Tapping direction:	vertical	vertical	vertical
speed:	75-370r.p.m.	100-470r.p.m.	120-570r.p.m.
Spindle torque:	218.28NM	186.62NM	169.30NM
Hydraulic pressure:	140 bar(Kg/cm²)	140 bar(Kg/cm²)	140 bar(Kg/cm²)
variable frequency motor:	5.5 CV 50Hz	5.5 CV 50Hz	5.5 CV 50Hz
electricity press:	380Vthree-phase50Hz	380Vthree-phase50Hz	380Vthree-phase50Hz
speed control:	Variable frequency drive with stepless speed regulation	Variable frequency drive with stepless speed regulation	Variable frequency drive with stepless speed regulation
scope of work(radius):	1280mm	1280mm	1280mm
scope of work(diameter):	2560mm	2560mm	2560mm
Workbench length, width, and height:	720X550X880mm	720X550X880mm	720X550X880mm
Quick change chuck interface diameter:	31mm	31mm	31mm
Oil storage capacity:	40L (liters)ISO VG-46）	40L (liters)ISO VG-46）	40L (liters)ISO VG-46）
machine device heavy quantity:	280Kg (kilograms)	280Kg (kilograms)	280Kg (kilograms)

RHG-M3-M24RHG-M2-M20RHG-M2-M16

technical indicators(model):	RHG-M3-M24	RHG-M2-M20	RHG-M2-M16
Atall	1800mm	1800mm	1800mm
Blow	680mm	680mm	680mm
Crise and fall	490mm	490mm	490mm
Dadjust up and down	160mm	160mm	160mm
ESliding range	490mm	490mm	490mm
FUp and down itinerary	325mm	325mm	325mm
G-arm length	375mm	375mm	375 mm
Standard Configuration: 1Parallel tapping force arm(3section)Hydraulic motor. 9Hydraulic pressure regulating valve(switch). 2、700550880 mm.TA workbench with grooves. 10Hydraulic pressure gauge(table). 3Independent speed control keys for the forward and reverse rotation speeds of the tap. 11Emergency stop switch. 4Hydraulic device(hydraulic pump). 12The groove for placing the clamp. 5Tap system regulating valve. 13Oil temperature display. 6Digital display for the forward and reverse speed of the tap. 14Hydraulic oil gauge. 7To the left and right(Forward and Reverse)Tap conversion key. 15Control key for cooling tap. 8High speed and low-speed conversion key. 16Adjustable height footrest.