-
E-mail
plastics@wensui.com
-
Phone
13650877088
-
Address
No. 48 Changsha Road, Shayong Village, Dalong Street, Panyu District, Guangzhou City
Product Categories
Wisken (Guangzhou) Environmental Protection Technology Co., Ltd
Separate sedimentation tank
NegotiableUpdate on 01/21
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
1. After being crushed or rubbed at the front end, the material enters the sedimentation tank through the feeding end and is first evenly distributed in the tank after passing through the feeding drum. 2. The feeding drum presses the material to fully sink underwater and simultaneously pushes the material towards the discharge end. 3. The material is raked out of the water tank through the discharge device. Impurities with a higher density will settle at the bottom of the pool and be transported out of the pool by a slag discharge screw. 4. The material soaked and cleaned in the water tank will be pushed towards the discharge port by the discharge device to complete the sedimentation and cleaning part.
Product Details
Product Introduction
Product Introduction
1. The separation sedimentation tank is mainly composed of a tank body, a feeding drum, a discharging device, a slag collection screw, a slag discharge device, and other components.
2. The separation sedimentation tank is mainly used as a rinsing and separation equipment for plastic cleaning lines. Its main function is to separate materials by sinking impurities with a density greater than water (such as sediment, sand, etc.) through the feeding drum.
2. The separation sedimentation tank is mainly used as a rinsing and separation equipment for plastic cleaning lines. Its main function is to separate materials by sinking impurities with a density greater than water (such as sediment, sand, etc.) through the feeding drum.
Scope of application
Applied Range
PET cleaning
HDPE cleaning
Film cleaning
Plastic particle cleaning
main components
Main Part
No data available
Features of the equipment
Characteristics of the Equipment
1. As a part of the cleaning line, the durability of the separation sedimentation tank must be of utmost importance. The parts of the separation sedimentation tank that come into contact with water and materials are made of stainless steel to increase the service life of the equipment.
2. Environmental protection and resource conservation are also synonymous with separation and sedimentation tanks. During the cleaning process, control excessive discharge of sewage to save excess inflow of purified water. The flow rates of sewage and purified water are carefully regulated by the Wesken design team, with discharge and inflow controlled proportionally to achieve the goal of conserving resources.
2. Environmental protection and resource conservation are also synonymous with separation and sedimentation tanks. During the cleaning process, control excessive discharge of sewage to save excess inflow of purified water. The flow rates of sewage and purified water are carefully regulated by the Wesken design team, with discharge and inflow controlled proportionally to achieve the goal of conserving resources.
Technical Reference
Characteristics of the Equipment
| model | Cleaning width/mm | Cleaning stroke/mm | Power/KW | Slag removal method | 出料方式 |
| ST1260 | 1200 | 6000 | 3.7 | Straight/Spiral | vertical arrangement |
| ST1560 | 1500 | 6000 | 3.7 | ||
| ST1860 | 1800 | 6000 | 5.2 | ||
| ST1880 | 1800 | 8000 | 5.2 |
