-
E-mail
plastics@wensui.com
-
Phone
13650877088
-
Address
No. 48 Changsha Road, Shayong Village, Dalong Street, Panyu District, Guangzhou City
Product Categories
Wisken (Guangzhou) Environmental Protection Technology Co., Ltd
Horizontal dehydrator
NegotiableUpdate on 01/21
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The Wesken Environmental Protection Horizontal Dehydrator is a device that allows materials that have been crushed and cleaned to enter the dewatering machine casing through the feed inlet. The high-speed rotating rotor generates centrifugal force to separate the materials and moisture from the sieve fixed inside the machine casing, achieving the purpose of dewatering. The horizontal dewatering machine can reach 1200RPM with a dewatering rate of 80% -90%. It is suitable for processing soft plastics such as films, ton bags, woven bags, etc.
Product Details
Product Introduction
Product Introduction
Wesken environmental protection horizontal dehydrator is often used as an auxiliary equipment in film cleaning systems. Compared to extruders, it is more efficient and effective when combined with hot air drying systems. In the film cleaning system, better dehydration effect is necessary to highlight the benefits brought by the resource recovery and regeneration system.
Scope of application
Applied Range
Vertical dewatering machine
Horizontal dehydrator
hot air drying
Thin film crushing and cleaning line
main components
Main Part
No data available
Features of the equipment
Characteristics of the Equipment
1. The spindle blades are made of 60Si2Mn material, which has high strength and is not easily deformed.
2. High rotational speed, high dehydration efficiency, not easy, up to 1200 revolutions per minute.
3. The screen mesh has strong interchangeability, is easy to replace, and has a wind pressure blowing function to prevent the screen mesh from clogging.
4. Water cooled structure bearing seat reduces heat generated by high speed and improves heat dissipation efficiency.
2. High rotational speed, high dehydration efficiency, not easy, up to 1200 revolutions per minute.
3. The screen mesh has strong interchangeability, is easy to replace, and has a wind pressure blowing function to prevent the screen mesh from clogging.
4. Water cooled structure bearing seat reduces heat generated by high speed and improves heat dissipation efficiency.
Technical Reference
Characteristics of the Equipment
| model | Spindle rotation diameter/MM | Cleaning schedule/MM | Power | Material handling type |
| HD6140 | 600 | 1400 | 55 | Granular material/flexible material |
| HD8140 | 800 | 1400 | 90 | |
| HD8160 | 800 | 1600 | 110 |
