Roller type cargo shower transfer window

Roller type cargo shower transfer windowThe specific function is a device placed on the partition wall of a clean room. The drum type cargo shower transfer window is an auxiliary equipment of the clean room. The drum type transfer window is used for the transfer of small items between different clean areas and between clean and non clean areas. The transfer window of the clean room has the function of an airlock to prevent non clean air from entering the clean room.

The drum type cargo shower transfer window has the following characteristics:

The drum type cargo shower transfer window is divided into two types according to its purpose: standard transfer window and clean transfer window; The shell is divided into three types according to the material: color steel plate type, thin steel plate spray coating type, and all stainless steel type; According to the form of door interlocking, it can be divided into two types: mechanical interlocking and electronic interlocking; Universal size, special specifications are made according to user requirements.

Key points to note for transportation of drum type cargo shower transfer window:

A、 The drum type cargo shower transfer window is suitable for general transportation. During transportation, it should be protected from rain and snow to prevent damage and rust.

B、 The drum type cargo shower transfer window should be stored in a warehouse with a temperature of -10 ℃~40 ℃, a relative humidity of no more than 80%, and no corrosive gases such as acid and alkali.

C、 When opening the drum type transfer window, civilized operation should be carried out, and there should be no rough operation to avoid damaging the purification unit inside the box or causing personal injury.

D、 After opening the drum type cargo shower transfer window, please confirm whether the product is the designated product, and then carefully check the contents of the packing list for missing parts and whether each component has been damaged due to transportation. If any damage is found, please contact the transfer window manufacturer within two days of receiving the product.

E、 If the drum type cargo shower transfer window undergoes self modification, it is not within the warranty range.

Attention points for electrical issues of drum type cargo shower transfer window:

1. Please do not repeatedly operate the power switch within one minute to avoid damaging electrical components due to operation.

2. The transfer window is not capable and is strictly prohibited from being used in flammable and explosive environments.

3. Please do not use any electrical components inside the product. If necessary, please cut off the power first.

4. Do not modify it to avoid accidents such as electric shock and fire.

5. Please cut off the power supply when checking the transfer window to avoid accidental start-up and personal injury.

The current sealing glue used for the drum type cargo shower transfer window without partition high-efficiency filter is A and B glueAnd other manufacturers use polyurethane adhesive. A. The glue ratio of B glue is 12, which has good sealing performance. However, once the ratio is out of balance, it can cause serious consequences, such as glue not drying out or glue bubbles, resulting in the filter being scrapped.

6. Please do not connect heavy power leads or clamp power leads to prevent damage and electric shock caused by power lead breakage.

7. When replacing a fuse, ensure that its capacity does not exceed its capacity to avoid causing a disaster.

The drum type cargo shower transfer window can be divided into stainless steel transfer windows according to the material of the box bodyOuter steel plate and inner stainless steel transfer window, etc. The commonly used plates for making transfer windows include cold-rolled steel plates (A3 plates) and stainless steel plates (SUS201, SUS304, SUS316, etc.).

The thickness of the drum type cargo shower transfer window is generally 0.8~1.5mm. (The production of transfer windows belongs to thin plate welding, which requires high welding and polishing techniques from welders. The inner lining of the transfer window is made of sandblasted stainless steel, and the price and cost of different materials of transfer windows are different.). ）

The general blowing time of the drum type cargo shower transfer window can be calculated based on the time. If you want to pass the workers in 10 minutes, the blowing time is usually around 20 seconds. You can blow 3 times per minute, with 30 people blowing. If one person blows at a time, the problem can be solved in 10 minutes;

Roller type cargo shower transfer window specifications and dimensions: