Price of Water Tanker Testing Machine, Dual Climate Test Box Water Tanker Water Tanker Experiment

Price of Water Tanker Testing Machine, Dual Climate Test Chamber, Water Tanker Testing Machine, Water Tanker Testing Machine

Product Description Model, Type: JH-CDST

Car light water test machine (with temperature and humidity adjustment car light washing test system)

1、 Equipment testing

Implement according to TSC 3000G 4.4.6 test method (1) The initial adjustment of the test sample will be implemented as follows for initial humidity control
(a). Light foam part, light foam, light foam, etc.
（ｂ）. Place the test sample in an environment around 80 ℃ for 24 hours to dry it
（ｃ）. Place the test sample in an environment of 25 ℃ and 75% RH for 24 hours to humidify it
（ｄ）. Place it in an environment around 23 ℃ and 55% RH for 1 hour to allow external air to circulate with the inside of the test sample
(E). At 23 degrees Celsius, 55% RH peripheral edge, light foam foam, * * * light foam, foam foam, etc.
(2) Experimental conditions
（ａ）. After initial humidity adjustment, the test sample is placed in the testing machine in a regular delivery state
（ｂ）. After setting the temperature of the lamp shell side at 20 ℃, the temperature of the lamp back (base side) at 23 ℃, and 55% RH, place the lamp in the off state for 1 hour
（ｃ）. Set the back of the lamp to 80 ℃ and turn on the low beam (including the low beam lighting function lamp) with a bulb voltage of 13.0V
（ｄ）. Control the temperature on the back of the lamp to rise linearly from 23 * 80 ℃ to 30 ± 5 minutes, but the humidity should be below 10% RH at 80 ℃
（ｅ）. Observe the occurrence of fog every 10 minutes after lighting, and measure the time of fog occurrence
（ｆ）. For situations where there is no fog for 1 hour continuously, observe every 30 minutes at intervals of 1 hour and 30 minutes, and extend the observation for 2 hours
（ｇ）. On the side of the lamp shell, observe and confirm the occurrence of fog with the light (when confirming fog, the lamp should be turned off)
＜Shall be carried out in accordance with Section 4.4.6 of TSC3000G.＞
2、 Basic specifications of the equipment:
This device is divided into two testing areas: left and right
The right area is the back of the installation lamp (engine compartment surface), where high and low temperature cycling and constant temperature and humidity are carried out
The left area is the lens installation surface (exterior components), where cold water, rain, and constant temperature and humidity are used for operation
Both left and right zones can operate independently under temperature and humidity conditions during separation
Type: TMJ-9812 L
Power supply: 220V three-phase 50/60HZ
Power: 21KW
Temperature and humidity specifications:
Right zone temperature range: -10 ℃ * 100 ℃
Left zone temperature range: -30 ℃ * 100 ℃
Heating and cooling rate: Both zones are the same at around 1 ℃/M between -10 ℃ and 80 ℃ (slope control)
Right zone humidity range: 20% * 98% RH (can operate at 20 ℃± 3 ℃ 38% ± 5% RH)
Left zone humidity range: 20% * 98% RH (can operate at 70 ℃± 3 ℃± 10% ± 5% RH) when using external air inlet
Resolution: 1. Temperature ± 0.3 ℃
2. Humidity ± 0.3% RH
Distribution uniformity: 1. Temperature ± 1.0 ℃
2. Humidity ± 3.0% RH
Rainfall specifications:
Rain pump: 1hp original Japanese machine installation
Flow meter: A set of 2-15 liter pointer flow meters
Thermostatic water bath: 60 liter SUS # 304 stainless steel thermostatic water bath (temperature control range: 10-35 ℃)
Nozzle: 5 original spray systems from the United States
Nozzle conduit: SUS # 304 stainless steel universal conduit
Rainfall conditions:
Water temperature: 15 ℃+1 ℃/-2 ℃
Nozzle pressure: 0.2Mpa (max)
Rainfall: 10 liters per minute (max)
Splitting angle of nozzle: 830
III Material used:
1. Inner box material: made of SUS # 304 stainless steel plate
2. Outer box material: Made of SUS # 304 high tension stainless steel, treated with matte texture
3. Insulation material: Imported high-strength PU foam insulation material
4. Insulation layer thickness: 100mm
5 o'clock division angle 20 degrees/30 minutes
6. Spiral high-pressure pump with pressure sensor and flow control device
7. Original Japanese pressure protector
8. Laminated vacuum glass window 400 x 400mm
9. Universal air duct and fixed bracket air outlet
10. The sealing of the lighting fixtures is made of flame-retardant and high-temperature resistant canvas
4 Control system: using TEMI 880, T.F.T. LCD on both sides
Digital temperature and humidity controller or equivalent
1. Can execute 1000 segment mode
2. Each section can be executed by cross grouping
3. Each execution time can be set to 0-999H59 minutes
4. Each group can be partially cycled 1-999 times or fully cycled 1-999 times, and can be freely selected
5. Microcomputer PID automatic calculation function
6. It has a power-off function and can continue to perform unfinished tests after power is restored
7. Can the execution of each segment be carried out in a group looping manner?? And can know the remaining time of execution
8. Single segment control or multi-stage programmable control can be selected
When executing single segment control, the execution condition values can be arbitrarily changed
10. Graphics can be displayed during editing or operation
11. Comes with six timing contacts (can be connected to actuation programs)
Does the screen have backlight time control?? And adjustable brightness of backlight
13. Memory type multifunctional control, equipped with various groups of refrigeration compressor solenoid valves for heating HEATER and humidifying HEATER; Fully automatic control output function
Five Freezing system:

1. Two sets of energy-saving industrial low-temperature compressors on both sides

2. The cooling method adopts air-cooled type
3. * Refrigeration equipment such as drying filters and solenoid valves
4. The condenser adopts fins and is equipped with a cooling motor device
VI Heating system:

1. Use U-Type SUS # 304 electric heating tube for heating
2. The humidification bucket is made of SUS # 304 stainless steel and has a water level observation window
3. Heating, cooling, humidification, and dehumidification systems****
4. Intelligent automatic heating and humidification function
7 Protective device:

1. Equipped with a non fuse protection switch
2. Equipped with pressure protection, explosion-proof protection and other devices
3. Cold coal high and low pressure protection device and compressor overload protection device
8 Airflow circulation system:

1. Adopt multi blade centrifugal fans and sealed motors, which are not prone to oil loss and choke center
2. Vertical diffusion, horizontal exchange, and arc-shaped circulating air supply method
3. Adjustable side blowing air outlet and protective net recycling port