Online carbon silicon analyzer for molten iron

LC-TS3 typeOnline carbon silicon analyzer for molten iron

1、 Application Overview

Suitable for on-site rapid and accurate determination of the main chemical composition and mechanical properties of casting alloy melts in casting production. Widely used for on-site measurement of carbon equivalent CEL, carbon content C%, silicon content Si%, pouring temperature TM, liquidus temperature TL, and solidus temperature TS in raw iron such as gray iron, mare iron, ductile iron, and creep iron. It solves the problem that conventional analytical instruments cannot meet the time requirements for rapid analysis before the furnace, and meets the quality control requirements of casting production

2、 Main functional features

1. LC-TS3 typeOnline carbon silicon analyzer for molten ironUsed for rapid analysis and quality control of molten iron composition in front of casting furnaces, it adopts anti electromagnetic interference, dust-proof, ultra-thin and portable design, which is economical, practical and easy to operate.

2By improving the evaluation method, important metallurgical parameters can be automatically controlled to compensate for the difficulty of accurately measuring non-metallic elements (C, Si) in "spectra" and the inability of conventional analytical instruments to meet the time requirements for rapid analysis before the furnace, thus meeting the quality control requirements of casting production.

3The instrument adopts high brightness and large-sized LED digital display, which can easily read measurement data from the LED display screen even in dim light.

4The instrument can automatically measure gray white solidified cast iron, eliminating manual operation. External output devices that can connect signals and measurement data (large remote displays, signal lights, computers, printers).

5Adopting the domestically produced Omega K thermocouple with compensation connectors in the United States to avoid signal fluctuations caused by connector issues that may affect testing accuracy.

6Germany imports silicone rubber thermocouple extension compensation wires that are very soft, heat-resistant, and have small errors, greatly improving the service life of the wires and enhancing testing accuracy.

7By using high-precision and low drift thermocouple signal processing chips, as well as PPM level drift and low stability thin film resistors, the testing accuracy can be improved by orders of magnitude.

3、 Main technical parameters

1Application function: Measure C%, Si%, CEL, △ T, △ TM, etc. of gray and white solidified cast iron

2Measurement range: C: 2.1 to 4.2; Si：0～20； CEL：2.5～5.0； Model K: 200 ℃~1370 ℃

3Measurement accuracy: C: ± 0.039%; Si：±0.1%； CEL：±0.047%

4Measurement time: no more than 240 seconds

5Data display: 4-digit LED display; Character height 50mm; resolution 1 ℃

6Status display: green light "ready", yellow light "measured", red light "completed"; cycle display

7Power requirements: Power supply 100-240V/AC (customizable with wider voltage range), 50/60Hz, power 15-35VA; ambient temperature 0-50 ℃

4、 Composition of instruments

1、 One LC-TS3 online carbon silicon analyzer for molten iron

2100 high-precision thermal analysis sample cups (available in square and circular shapes)

31 set of sample cup holder with very soft extension compensation wire (formula type and circular sample cup are optional)