Oil separation and strong drainage equipment

Oil separation and strong drainage equipmentThe adaptability is relatively strong, mainly relying on the operator's experience and technical level, with low efficiency (about one-third of the entire prototype model cycle), and high labor intensity and unstable quality of workers, which restricts the development of model processing to higher levels.

1. Good safety performance: automatic high and low voltage protection function for water leakage and leakage, no wastewater protection function, and liquid level protection function for storage tanks;
2. Wide practicality: can adapt to wastewater treatment in various laboratories;
3. Source of raw water and its total hardness, total alkalinity, and total salt content;
4. Automation: PLC intelligent control system, human-machine interface operating system, fully automatic treatment of wastewater, automatic calculation and proportional automatic dispensing of drugs for different components and concentrations of wastewater, more scientific and rational;
If the inlet pressure is too low, an automatic boosting device needs to be installed, which our company can provide.
6. Regularly follow up with customers every two months or consult them by phone to understand the operating conditions of the equipment, and promptly address any issues found; Conduct on-site inspections of equipment operation status once every quarter and keep inspection records;
7. Upon arrival at the customer's repair site, conduct a preliminary inspection of the customer's unit malfunction, check for any damaged parts, and keep a record of the damaged spare parts;
However, given the current state of socio-economic and technological development, it is not yet possible to eliminate this processing method.
9. For each maintenance of the customer's unit, the replaced spare parts should fill out the "Maintenance Spare Parts Replacement Details Form", which should be signed by the customer and the head of the office, and then sent to the manufacturing plant's customer service center for filing and record keeping;
10. Suitable filtering devices must be installed on the inlet pipeline of the equipment to prevent large impurities from entering the valve body of the main controller and causing damage.
11. Raw water temperature: 5-45 ℃;

1. The fluorine system is equipped with aluminum bars, which can be equipped with electric defrosting devices to solve the problem of difficulty in defrosting steel bars.
2. Power supply: AC 220V, 50Hz Power (valve head): 3W-40W;
3. The steam ink cleaning wastewater enters the condensation system and is cooled by an explosion-proof fan (or water-cooled cooling can be chosen) before liquefying. The clean organic ink cleaning wastewater flows into the ink cleaning wastewater collection tank.
4. Equipment pipelines should preferably use pipes with non rusting structures, and flexible fittings must be installed on the pipelines for future maintenance and disassembly.
5. If the user uses underground well water or surface water as the water source for the softener, it is recommended that the user install a suitable fine filtration device in front of the equipment to prevent the resin from being contaminated by deep well sediment or other impurities, which can greatly reduce the service life of the resin.
6. Salt consumption: 0.16-0.24KG/L
7. The production of aluminum bars is completed in the factory with guaranteed quality and performance, while the on-site production of steel bars is troublesome and the quality is difficult to guarantee.
8. Inlet pressure (unit: MPa). If there is no pressure, we can equip a booster pump, which should be between 0.25-0.35 MPa;
9. The equipment has a compact structure, occupies a small area, and does not require any equipment foundation. It can be directly placed on a flat cement floor.
10. Two sets of hydraulic devices are used to lift the arm backwards, flip the pot and pour materials, avoiding disassembly and assembly of the mixing device, making it easy to enter and exit raw materials and saving manpower.
11. A hemispherical stainless steel pot body formed by one-time stamping, using gas heating, has a large heating area and high thermal efficiency. All parts of this product that come into contact with food are made of 304 stainless steel and polished.
12. Start the high-pressure pump.
13. Remote monitoring and operation function: Simply use remote control software in the office or central control room to remotely monitor, operate, and manage the wastewater treatment equipment in the wastewater treatment room, and keep track of the equipment's operation and status at any time.
Oil separation and strong drainage equipment