OM-CP-HITEMP140-FP-36 Temperature Recorder

Characteristics of OM-CP-HITEMP140-FP-36 Temperature Recorder

High temperature data logger with flexible probe

PFA coated flexible probe with a length of 91.4 centimeters (36 inches) or 183 centimeters (72 inches)
Operating temperature range: -40 to 140 º C (-40 to 284 ° F)
Optional ventilated or embedded insulation panels that can operate at temperatures up to 250 ° C (482 ° F)
The probe measurement range is -60 to 260 ° C (-76 to 500 ° F)
Accuracy of ± 0.1 ° C (± 0.18 ° F)
Submersible (IP68)
Trigger setting
Programmable start and stop times
4 Hz reading rate
Ready to use type
Free NIST certification

OM-CP-HITEMP140-FP-36 Temperature RecorderIt is a durable and user-friendly high-temperature data logger, characterized by a slender and small diameter RTD probe, which is very suitable for use in steam * * and freeze-drying processes. This stainless steel data logger is commonly used for mapping, verifying, and monitoring high-temperature surfaces and environments. There are two models, OM-CP-HITEMP140-FP-36 and OM-CP-HITEMP140-FP-72. A flexible probe length of 91.4 centimeters (36 inches) or 183 centimeters (72 inches). The flexible probe is coated with PFA insulation and can withstand temperatures up to 260 ° C (500 ° F) with an accuracy of ± 0.1 ° C (± 0.18 ° F). OM-CP-HITEMP140-FP also offers an optional heat shield to extend the working range of the data logger to -200 to 250 ° C (-328 to 482 ° F). OM-CP-HITEMP140-FP-TSK (Heat Shielding Kit) comes with a ventilated or top flush housing, suitable for a variety of applications.

The OM-CP-HITEMP140-FP probe is designed to be narrow and lightweight, making it ideal for placement in small bottles, tubes, test tubes, and other small diameter or precision applications. Due to the use of flexible probes, the risk of rupture (small bottles and probes) typically associated with stainless steel probe data loggers is reduced, and the position and location of the probes are easy to operate. This device can record and store up to 32700 time stamped readings, and is equipped with non-volatile solid-state memory that can retain data even when the battery is discharged.

OM-CP-MULTIMANT-Z is a multifunctional stand or bracket that can be used in conjunction with the OM-CP-HITEMP140 series data logger. It can be used to stabilize the recorder inside an autoclave, or it can be screwed onto a flat surface to form a fixed base. OM-CP-MULTIMANT-Z is made of 316 stainless steel and can withstand temperatures up to 150 ° C (302 ° F), making it ideal for high-pressure transformer processes.

OM-CP-HITEMP140-FP uses * new software. Data can be viewed in graphical or tabular form, and summaries and statistical views can be used for further analysis. This software has the ability to export to Excel ®， Data annotation, digital calibration, and other functions.

OM-CP-HITEMP140-FP-36 Temperature Recorder Specifications
OM-CP-HITEMP140-FP (Data logger without heat shield)
temperature
Temperature Sensor: Flexible 100 Ω Platinum RTD
Probe measurement range: -60 to 260 ° C (-76 to 500 ° F)
Temperature resolution: 0.01 ° C (0.02 ° F)
Calibration accuracy: ± 0.1 ° C (± 0.18 ° F)

average
Data logger response time (hours: minutes: seconds: fractions of a second):
In the air:
T60-00:00:30:00 (reaching 60% step change in 30 seconds)
T90-00:00:00 (90% of the step change can be achieved in 70 seconds)
In the water:
T60-00:00:03:50 (60% step change can be achieved in 3.5 seconds)
T90-00:00:06:50 (achieving 90% step change in 6.5 seconds)
Reading rate: 4 readings per second, 1 additional reading every 24 hours
Memory: 32767 readings
Startup mode:
• The software can be programmed to start immediately
• Delay * Start up 18 months in advance
Stop mode: manual or timed (specific date and time)
Trigger setting: Upper and lower limits can be set. Once the data reaches or exceeds the set limit, the device will record it in memory. Dual layer start and stop triggers can also be programmed. Users can read the number of readings to be read after the device is triggered.
Readings in trigger setting mode: 10922 readings
Real time recording: Can be used with a PC to monitor and record data in real-time
Password protection: Optional passwords can be programmed into the device to restrict access to configuration options. No password is required to read data.
Memory line break: Yes
Battery type: Comes with 3.6V high-temperature lithium battery; User replaceable
Battery life: typically 1 year [read rate of 1 minute at 25 ° C (77 ° F)]
Calibration: Digital calibration through software
Calibration date: automatically recorded in the device
Data format: Date and timestamp in ° C, ° F, ° R, K
Time accuracy: ± 1 minute/month at 25 ° C (77 ° F)
Extension operation: ± 20 minutes/month at 140 ° C (284 ° F)
Computer interface: OM-CP-IFC400 USB docking station or OM-CP-IFC406 multiplexer interface is required; 125000 Porter
Software: Windows XP SP3/Vista/7 and 8 (32-bit and 64 bit)
Working environment: -40 to 140 ° C (-40 to 284 ° F), 0 to 100% RH
Protection level: IP68
Size (body): 75 H x 24.6 mm D (2.95 x 0.97 ")
Size (probe):
OM-CP-HITEMP140-FP-36: 91.4 cm long x 2.5 mm diameter (36 x 0.1 inches)
OM-CP-HITEMP140-FP-72: 183 cm long x 2.5 mm diameter (72 x 0.1 ")
Weight: 85 grams (3 ounces)
Material
Body: 316 stainless steel
Probe: PFA insulated cable
OM-CP-Multi installation-Z
Material: 316 stainless steel
Size: 44.5 H x 38 L x 38 mm W (1.75 x 1.5 x 1.5 ")

OM-CP-HITEMP140-FP-36 Temperature Recorder Ordering Guide

OM-CP-HITEMP140-FP-36 Temperature RecorderComes with a 3.6V lithium battery. The OM-CP-IFC400 software/cable packaging or OM-CP-IFC406 multiplexer (required for data logger operation, sold separately) comes with an operation manual and USB interface cable.