National sales of second-hand stainless steel reaction vessels

National sales of second-hand stainless steel reaction vessels

Operating procedures for second-hand stainless steel reaction kettle:
1. Check whether the kettle, mixer, rotating parts, auxiliary equipment, indicating instruments, safety valves, pipelines and valves meet safety requirements.
2. Check if water, electricity, and gas meet safety requirements.
1. Before adding materials, the mixer of the reaction kettle should be turned on first. When there is no noise and it is normal, the materials should be added to the reaction kettle, and the amount of materials added should not exceed the process requirements.
2. Before opening the steam valve, first open the return valve, and then open the intake valve. The steam valve should be opened slowly to preheat the jacket and gradually increase the pressure. The pressure inside the jacket should not exceed the specified value.
3. The steam valve and cooling valve cannot be started simultaneously, and hammering and collision are not allowed when the steam pipeline is out of air.
4. When opening the cooling water valve, first open the return valve and then the inlet valve. The cooling water pressure shall not be lower than 0.1 megapascals, nor shall it be higher than 0.2 megapascals.
5. The water ring vacuum pump should be started before supplying water. When stopping the pump, the pump should be stopped first and then the water should be stopped, and the accumulated water in the pump should be drained.
6. Check the operation of the reaction kettle at any time and stop for maintenance if any abnormalities are found.
7. When cleaning the titanium epoxy (enamel) reaction vessel, do not use alkaline water to brush the reaction vessel, and be careful not to damage the enamel.
2. When shoveling the pot, the power supply of the mixer must be cut off, warning signs must be hung, and someone must be assigned to supervise.
3. Stainless steel reaction vessels must undergo regular technical inspections in accordance with pressure vessel requirements. If the inspection fails, they cannot be operated.
6 Classification Selection
1. Product Name: Glass lined Reactor
2. Product Name: Multi functional Dispersion Reactor
3. Product Name: Magnetic Stirring Reactor (Chemical Reactor)
4. Product Name: Electric Heating Reactor
5. Product Name: Steam Heating Reactor
6. Product Name: Second hand Stainless Steel Reactor
National sales of second-hand stainless steel reaction vesselsSuitable fields: Suitable for conducting high-temperature and high-pressure chemical reaction tests in departments such as petroleum, chemical, pharmaceutical, metallurgy, scientific research, and universities. It can achieve high stirring effect on viscous and granular substances