Micro electrolysis water tank self-cleaning and disinfecting device

wts-2aWater self cleaning sterilizerThe water treatment equipment consists of two parts: a circulating energy release device and an energy controller. The energy controller adopts microcomputer technology to control the cyclic energy release device, ensuring that it always operates in good condition. The circulating energy release device consists of a circulating water pump, an energy release device, a suction pipe, a water distributor (outlet pipe), etc.

The self-cleaning and disinfecting device for water tanks consists of two parts: a circulating energy release device and an energy controller. The energy controller adopts microcomputer technology to control the cyclic energy release device, ensuring that it always operates in good condition. The circulating energy release device consists of a circulating water pump, an energy release device, a suction pipe, a water distributor (outlet pipe), etc.

Disinfection principle of water tank self-cleaning sterilizer and water treatment equipment:

By circulating micro electrolysis of substances in water (chlorine dioxide (CIO2), ozone (O3), reactive oxygen species (O), molecular chlorine (Cl2), etc.) to produce oxidizing substances, bacteria in drinking water can be killed; When the water stays in the water for a long time, a certain concentration of oxidizing substances can be generated in the water for continuous disinfection (equivalent to the effect of residual chlorine).

Water tank self-cleaning sterilizer water treatment equipment features:

1. Can produce mixed highly oxidizing substances, with fast sterilization and algae killing speed, and has broad-spectrum properties that can kill all microorganisms

2. The above-mentioned composite oxidizing substances can prevent the side effects caused by the use of chlorine, ozone and other disinfection methods alone

3. Not only disinfecting water bodies, but also disinfecting water tanks and pools

4. Has a continuous disinfection effect

5. Increase oxygen and reduce water hardness, improve the quality of domestic water

6. Non toxic, harmless, non polluting, easy to install and use

Installation method of self-cleaning and disinfecting device for water tank:

1. Install the energy controller in a dry and ventilated area with rain and waterproof measures. 2. Connect the control cable to the energy controller. 3. Make the water level exceed the energy release circulation ring, and connect the 220V main power supply within the specified time to start the self-cleaning sterilizer working. Power on according to the specified time.

The effectiveness of the self-cleaning and disinfecting device for water tanks:
When the conductivity of the raw water is greater than 200 μ s/cm (I-15mg/L), the killing rate is greater than 99.9% after 48 hours of treatment. After being treated by the self-cleaning and disinfecting device of the water tank, the bacteriological indicators of the treated water quality can be guaranteed to meet the national "Hygienic Standards for Drinking Water Quality" (2001). It can also ensure that the water tank and pool comply with the "Sanitary Code for Secondary Water Supply Facilities" (GB17051-1997).