Guorun WTS-2A Water Tank Self Cleaning Disinfector

GuorunWater self cleaning sterilizerOzone sterilizerAdopting an automatic time control system, users can set working hours arbitrarily, with 10-15 time periods set per day; The host adopts high concentration ozone disinfection, and the generator part is a stainless steel quartz medium generating tube; The article on dual cooling technology of water cooling and air cooling comes from: hot stamping technology; Optimized gas source processing system configuration; Imported power core components, digital control power technology, hot stamping technology, with three major functions of voltage regulation, frequency conversion, and boost.

In our lives, water is an essential presence It is an important resource for all life, including humans, and water stored in tanks and pools can be directly used in daily life. Air contact is inevitable in water tanks, pools, and their daily water systems, which can introduce microorganisms and breed in humid environments. Microbial growth in stagnant water areas of water tanks and pools can cause secondary pollution of water bodies and produce unpleasant odors, making domestic water not meet hygiene standards.

Our company has conducted extensive market research and analysis, and our development department has carefully developed a new type of self-cleaning disinfectant for water tanks. It is economical and durable, and can achieve disinfection of water bodies through the self circulation of water and the addition of appropriate strong oxidizing substances.

Working principle of self-cleaning and disinfecting device for water tank:

Firstly, place the circulating water tank of the self-cleaning sterilizer in the middle and lower part of the water tank to ensure even water circulation in the tank. When the water level reaches the high water level set by the level gauge, the electric control cabinet starts to start the high-voltage power supply and the strong oxidizing gas generated by the submersible pump through the pipeline to the aeration section; Aeration disinfection is carried out on the water, and the submersible pump sends the disinfected water back to the water tank to circulate the stagnant water. This circulation ensures the disinfection of the water and guarantees its quality. This product has already set the time before leaving the factory, and users do not need to set it again.

Characteristics of self-cleaning and disinfecting device for water tank:

1. Adopting a time automatic control system, users can freely set working time periods, with 10-15 time periods set per day; The host adopts high concentration ozone disinfection, and the generator part is a stainless steel quartz medium generating tube; The article on dual cooling technology of water cooling and air cooling comes from: hot stamping technology; Optimized gas source processing system configuration; Imported power core components, digital control power technology, hot stamping technology, with three major functions of voltage regulation, frequency conversion, and boost.

2. The self-cleaning and disinfecting device of the water tank can work continuously for 24 hours without interruption; The power supply and discharge tube are matched, using power soft switching technology, with an efficiency of over 95%; According to user requirements, an ozone ultraviolet dual disinfection device is configured with strong sterilization power.

Precautions for self-cleaning and disinfecting water tank:

1. Before operating the equipment, the water tank should be cleaned thoroughly to prevent contamination or damage to the equipment.

2. The equipment should be well ventilated, dry, and not close to large heat sources to prevent overheating during motor operation

3. The equipment should be placed steadily to avoid excessive vibration during motor operation.

4. The water tank must ensure timely replenishment and normal water level!

5. The equipment is equipped with a nearby drainage ditch, and the sewage pipe is directly introduced into the drainage ditch.

6. After the initial operation or cleaning of the water tank, perform a backwash and discharge operation. During the manual discharge process, open the discharge solenoid valve and manual backwash valve, and discharge for 1-2 minutes, based on clear water. When the backwash is completed and running, close the backwash manual valve and the discharge electric execution method, and the backwash is complete.