-
E-mail
sales@caikon.com
-
Phone
13917369745
-
Address
No. 41, Lane 98, Shunda Road, Jiading District, Shanghai (Nanxiang Modern Enterprise Park)
Product Categories
- Metallographic cutting machine QG-4A
- Metallographic cutting machine QG-5A
- Metallographic cutting machine QG-3A
- LED inverted microscope
- Metallographic cutting machine QG-1
- Metallographic cutting machine QG-3
- Metallographic cutting machine QG-5
- Metallographic cutting machine QG-2
- inverted microscope
- hot stage
- Metallographic cutting machine QG-4
- Diamond spray polishing agent
Shanghai Caikang Optical Instrument Co., Ltd
Metallographic Cutting Machine
NegotiableUpdate on 03/02
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
This machine is used for cutting general metallographic and lithological sample materials. The machine is equipped with cooling channels and switches that can be used to introduce pre configured coolant during cutting to remove the heat generated during cutting, avoiding overheating of the sample and burning of the tissue.
Product Details
QG-3A Sample Cutting Machine This machine is used for cutting general metallographic and lithological sample materials. The machine is equipped with cooling channels and switches that can be used to introduce pre configured coolant during cutting to remove the heat generated during cutting, avoiding overheating of the sample and burning of the tissue. This machine is easy to operate, safe and reliable, and is one of the laboratory sample preparation equipment. The grinding wheel spindle is installed in the rocker arm bearing seat and obtains power for the feed motion of the grinding wheel cutting through the transmission of the triangular belt pulley. The speed of the cutting feed is determined by the speed of the manual rocker arm swing. Above the workbench is a quick clamping mechanism for the sample, and the pressure rod can move up and down freely for easy and flexible clamping. The pressure rod is hollow and filled with coolant, and below the pressure block is a working jaw with a "V" groove for clamping the sample. The workbench is equipped with a transparent organic glass protective cover for observation and protection during cutting. The inlet and outlet water channels and coolant switches inside the machine can be adjusted or closed according to cutting needs, and the flow rate of coolant can be adjusted or closed as needed. The cooling water tank is used to store coolant, and the pre configured coolant can be recycled. It is necessary to choose a coolant with good lubricity for the configuration of the coolant. Do not use regular tap water as a coolant. Diamond grinding wheels must be used for cutting sample materials such as rocks and ceramics. (Diamond grinding wheel blades require special ordering). Main parameters： Maximum cutting width: 60mm Maximum cutting height: 80mm zui大切割面直径： Φ50mm Grinding wheel specification: 250 × 2.0 × 32mm Electric motor: y90L-2 2.2kw Dimensions: 580 × 560 × 680mm Weight: 150kg | |
|
