Manufacturer supplies high-quality HYDAC Hedeke filter cartridge 1315382

Manufacturer supplies high-quality HYDAC Hedeke filter cartridge 1315382

To compress the external dimensions of the finished filter element and increase the filtering area, the filter layer is generally folded into a corrugated shape, and the height of the pleats on the hydraulic filter element is generally below 20mm. Hydraulic filter cartridges generally withstand pressure differentials of MPa, but some special filter cartridges require high pressure differentials, with high requirements of 32MPa or even 42MPa equivalent to system pressure. High temperature tolerance, some require up to 135 ℃. Strength requirements, production integrity requirements, ability to withstand pressure differences, ability to withstand external installation forces, and ability to withstand alternating pressure loads. Smooth oil flow requirements and flow resistance characteristics.
Resistant to certain high temperatures and compatible with the working medium. The filter fibers cannot be displaced or detached. Carrying a large amount of dirt. Normal use in high-altitude and cold regions. Fatigue resistance, fatigue strength under alternating flow. The cleanliness of the filter element itself should meet the standard. The replacement time of hydraulic filter element: Hydraulic press generally needs to replace hydraulic oil after 2000 hours of operation, otherwise it will cause system pollution and system failure. According to statistics, about 90% of hydraulic system failures are caused by system contamination. On the basis of checking the color, viscosity, and odor of the oil, it is also necessary to detect the oil pressure and air humidity.

HYDAC filter replacement time
Hydraulic excavators generally need to replace hydraulic oil after 2000 hours of operation, otherwise it will contaminate the system and cause system failure. According to statistics, about 90% of hydraulic system failures are caused by system contamination.
On the basis of checking the color, viscosity, and odor of the oil, it is also necessary to detect the oil pressure and air humidity. If working in an environment with high altitude and low temperature, it is also necessary to pay close attention to the carbon content, gum (olefin) and sulfide in the engine oil, as well as the impurities, paraffin and moisture content in diesel.
In special circumstances, if the machinery uses low-grade diesel (with a sulfur content of 0.5% to 1.0%), the diesel filter and engine filter should be replaced every 150 hours; Diesel and mechanical filters should be replaced every 60 hours when the sulfur content is above 1.0%. The replacement time for hydraulic return oil filter, pilot filter, and respirator filter for equipment with high hydraulic system loads, such as crushers and vibration hammers, is every 100 hours.

Manufacturer supplies high-quality HYDAC Hedeke filter cartridge 1315382