Manufacturer supplies HYDAC hydraulic oil filter element 1260882

Manufacturer supplies HYDAC hydraulic oil filter element 1260882

Features of Hedeke hydraulic oil filter element: 1. The filter element is made of imported fiberglass, which has the advantages of easy drainage, large flow area, low pressure loss, simple structure, small volume, light weight, and uniform filtering material. 2. The compatibility of the filter material is suitable for filtering general hydraulic oil. The 3 filter elements are supported by solid filter materials on both sides and stable filter materials, which comply with the verification of the flow fatigue characteristics of ISO3724/76 hydraulic filter elements.

Can perfectly meet the filtering requirements! The installation positions of Hydac Hedec filter elements in hydraulic systems are usually as follows:
(1) The filter element should be installed at the suction port of the pump: a surface type oil filter is usually installed on the suction path of the pump to filter out larger impurities and particles to protect the hydraulic pump. In addition, the filtering capacity of the oil filter should be more than twice the pump flow rate, and the pressure loss should be less than 0.02 MPa.
(2) The filter element is installed on the outlet oil circuit of the pump: the purpose of installing the oil filter here is to filter out pollutants that may enter valve components and other parts. Its filtration accuracy should be 10-15 μ m, and it should be able to withstand the working pressure and impact pressure on the oil circuit, with a pressure drop of less than 0.35 MPa. At the same time, a safety valve should be installed to prevent clogging of the oil filter.
(3) The filter element is installed on the return oil path of the system: this installation plays an indirect filtering role. Usually, a back pressure valve is installed in parallel with the filter. When the filter becomes clogged and reaches a certain pressure value, the back pressure valve opens.
(4) The filter element is installed on the branch oil circuit of the system.
(5) Filter element separate filtration system: Large hydraulic systems can be equipped with a dedicated hydraulic pump and oil filter to form an independent filtration circuit.
In addition to the oil filter required for the entire system, a separate fine oil filter is often installed in front of some important components (such as servo valves, precision throttle valves, etc.) in hydraulic systems to ensure their normal operation.

The core experiment follows the following standards

ISO2941 filter cartridge pressure cracking test ISO2942 filter cartridge structural integrity test ISO2943 filter cartridge material and fluid compatibility test ISO3723 filter cartridge end load test ISO3724 filter cartridge flow fatigue test ISO4572 multiple pass test ISO3968 filter cartridge pressure difference characteristic test ISO3968 flow pressure difference characteristic test

factoryHome Supply HYDAC Hedec Hydraulic Oil Filter 1260882