Manufacturer of enamel reaction kettle

enamel reaction kettleComposed of pot body, pot cover, mixer, jacket, support and transmission device, shaft seal device, etc., the material and opening can be customized according to the user's process requirements.

The heating forms include electric heating, oil heating, gas heating, water heating (or cooling), open flame heating, etc. The jacket form is divided into jacket type and outer half tube type, and the jacket oil heating type is equipped with a guide device.

The mixing forms generally include paddle type, anchor type, frame type, screw type, scraping wall type, etc. High speed types include dispersed blade type, turbine type, high shear type, and thruster type, which customers can choose according to their processes. Transmission forms include ordinary motors, explosion-proof motors, electromagnetic speed control motors, frequency converters, etc. Heat exchangers include cycloidal pin wheel type, worm wheel type, and planetary infinite variable speed type. The shaft seal includes ordinary water-cooled packing seal, combined PTFE packing seal, and mechanical seal. The discharge forms include ball valve and lower expansion valve.

enamel reaction kettleIt is based on the sufficient mixing of reactants, and stirring devices are required for physical processes such as heating, cooling, liquid extraction, and gas absorption to achieve good results.

1. Acid resistance:

It has good corrosion resistance to various organic acids, inorganic acids, and organic solvents. If the enamel glass samples produced by our factory are placed inBoil in a 20% HCI solution for 48 hours, and the corrosion rate is 0.9lg/m2. d (the standard for high-quality products is 1.0g/m2. d).

2. Alkali resistance:

Glass lining has poorer corrosion resistance to alkaline solutions than acidic solutions. But place our factory's enamel glass samples inCorrosion with 1N sodium hydroxide solution, tested at 80 ℃ for 48 hours. The corrosion rate is 6.76g/m2. d (the premium product index is 7.0g/m2. d).

3. Operating temperature:

When heating and cooling glass lined equipment, it should be done slowly. The operating temperature of the enamel glass equipment manufactured by our factory is0-200 ℃, with a temperature resistance of ≥ 200 ℃.

4. Ceramic layer thickness:

Ceramic layer thickness of glass equipment0.8-2.0mm， The porcelain layer thickness of the accessories of the enamel glass equipment is 0.6-1.8mm.

5. Voltage resistance:

Glass lining has good insulation properties. When the glass lining is used within the specified thicknessWhen inspecting the ceramic layer with 20KV high-frequency electric spark, the high-frequency electric spark cannot penetrate the ceramic layer.

6. Impact resistance:

The smaller the internal stress of the glass layer, the better its elasticity, the greater its hardness, and the higher its bending and compressive strength, the better its impact resistance. The glass layer in our factory is within the specified thickness, with a diameter of30mm， When impacted by a steel ball weighing 112g, its impact energy is 282 × 10-3J (the standard for high-quality products is 260 × 10-3J).