MTS connector 560885-OLD

MTS connector 560885-OLD,PROFIBUD, D53 connector for MTS magnetostrictive displacement sensor in the United States:

MTS connector 560885-OLD,(CAN) is a standard for device level communication and basic fieldbus such as DeviceNet, CANopen, and CAN bus. These fieldbuses can provide high-speed data transmission to accommodate the output of sensor data in industrial motion systems.

position
RP aluminum formed shell: 50-5080 mm
RH pressure resistant outer tube: 50-7620 mm
CAN bus system protocol ISO 11898
DeviceNet 2.0 version
Speed: 500 250 125 Landit/s
Line length:<100<250<500 m
(Users can freely change the transmission rate through programming software.)
0.5 ms (travel<1200 mm)/1.0 ms (travel<2400 nm)/
2.0 ms (travel<4800 mm)/4.0 ms (travel<7600 mm)
36Vdc large
2 μ m or 5 μ m
Full scale<0.01% soil (small soil 40 μ m)
Full scale<0.001% soil (small ± 2.5 μ m)
<4 μm
21 D brush et output|
DeviceNet protocol
R-series RP and RH linear position sensors belong to a slave device that complies with CANbus
(IS011898) standard. The electronic part of the sensor and the integrated software part are transmitted
The position data output of the sensor is converted into DeviceNet bus protocol standard format and passed through
Transmit to the controller via the bus. The transmission rate of DeviceNet can reach up to 500kBit/Sec.
The MTS R-series sensors under the DeviceNet protocol shall at least include the following functions:
·Position data output
·Error detection
• Polling and Bi1''51robe communication mode