Lubricating oil research and development testing system

TTT tapping torque testing&analysis software WinPCA3 has four major advantages
1. Real time output and display of six major data: torque, average value, standard deviation, Gaussian distribution, integration, temperature degree;
2. Window operation, simple interface, powerful functions; Colorful charts, clear at a glance;
3. Historical data and analysis results can be saved and reused;
4. Personalized settings can be saved and selected at any time.

GRAPH:Display curveSTATISTICSGaussian distribution
HISTORY: Historical recordsANALYSER: Data analysis
TEMPERATURE: Temperature curveMax:*Large value
Mean
Mean
Mean: Average value Std dev:standard deviation
Integral:
Integral:
Integral:points 　　　　　　　　　　　　　 dTemp %:Temperature difference percentage
Mean%:
Mean%:
Mean%:Percentage of average value Std dev %：Standard deviation percentage
TEMP1: Initial temperatureTEMP2End temperature
dTemp:temperature difference
Red curve:The variation of tapping torque of a cooling lubricating emulsion(concentration50% )



Green curve:The variation of tapping torque of another cooling lubricant emulsion(concentration7% )

Deep blue curve:The variation of tapping torque of a stainless steel cutting lubricant
Deep blue products are optimized products based on light blue products developed according to customer requirements.
Light blue curve: OtherThe variation of tapping torque of a stainless steel cutting lubricant



The bar chart shows the average torque of each product. The smaller the torque value, the better the lubrication effect. It can be clearly seen that the red product is slightly better than the green product, and the dark blue product is significantly better than the light blue product.
From the temperature difference, it can be seen that green products have a high water content and a low temperature difference of only 53.06, indicating a significantly better cooling effect than red products.
The cooling effect of dark blue products is significantly better than that of light blue products.
Advantages, functions, and principles of TTT tapping torque testing system (lubricant comparison tester)



For detailed introduction of TTT software, please click

The „TTT Tapping-Torque-Testsystem“ as a Multiple Evaluation System (MES) for Efficiency Ratings of Lubricants, Tapping Tools and Coatings	Detailed introduction to the software and application of the tapping torque testing system (lubricant comparison tester)	Image preview or content preview
Torque- and Temperature-Values	Torque and temperature values
Requirements / Practice Oriented Efficiency Rating	Requirement oriented/practical efficacy evaluation
TTT Methods	TTT method
Exclusion Principle /Analyser / Evaluation	Exclusion method/analysis procedure/evaluation
	Evaluation parameters:
Evaluation Parameters / Torque Values at a Glance	Overview of torque data
Torque / Mean Value / Standard Deviation	Torque/Average/Standard Deviation
Statistics (Gauss) / Integral (Area Calculation)	Probability and statistics (Gaussian method)/integration (area calculation)
Evaluation-Functions at a Glance	Overview of Evaluation Functions
Dual-Cursor / Graph-Smoothing / Overlay / Return Travel	Double cursor/graphic flatness/overlay/return status
The New Temperature-Sensor-Equipment TSE	New Temperature Sensor Device TSE
Temperature Value Delta T (Δ T)	Temperature value Delta T (Δ T)
Features / Conduct / Limits	Features/Design/Limitations
TTT Laboratory-Complete-System	TTT laboratory complete system
X-Y-Positioning Table MPT - Features / Advantages / Benefits	X-Y-Positioning Station MPT - Features/Advantages/Usage
General Evaluation-Applications	Ordinary assessment application
Analyser and other Software-Optimisations	Optimize analysis programs and other software
Calculation Formulas & Comparison Method	Calculation Formula&Comparison Method
Analyser / Comparison Method	Analysis program/comparison method
TTT Methods	TTT method
Thread Types Comparison / Cold Fusion / Built-Up-Edge	Comparison of thread types/cold welding/knives with burrs
Practical Example & Benchmarking	Example&Effect Comparison
Results and Analysis	Results and Analysis
Last but not Least	Conclusion
Carry-over-Effect / TTT Methods/ Know-how / Outlook	Side effects/TTT method/Technical secrets/Prospects