Lift type electric transmission window | Transmission box manufacturer

Lift type electric transmission window | Transmission box manufacturer

Elevating electric transfer windows are widely used in CSSD center supply rooms of various hospitals of different sizesAseptic distribution rooms, operating rooms, pharmaceutical factories, spray painting workshops, research rooms, purification rooms, and other enclosed places with high indoor and outdoor environmental requirements.

The lifting electric transfer window, which uses a motor for lifting, can effectively prevent hand pinching and is mainly used for transferring sterile items. It is a good transfer window in hospitals.

Elevating electric transfer windows and ordinary transfer windows are purification equipment installed on the partition walls between clean areas and non clean areas with different levels of tightening, used to transfer items to each other. According to the production process requirements, air shower transfer windows and ordinary transfer windows can be made. The air shower transfer window can generate clean high-speed airflow to spray items during transfer, removing dust from the items and preventing contamination of the clean room.

Features of the lifting electric transmission window:

Beautiful appearance and good sealing effectThe door adopts electronic interlocking or mechanical interlocking, with reliable performanceThe inner wall is made of stainless steel plate, which is flat, smooth, wear-resistant, and has a seamless bottom structureAccording to the process requirements, accessories such as buzzers, ultraviolet sterilization lamps, or walkie talkies can be selected.

Operating instructions for the lifting electric transmission window:

The stainless steel shell is beautiful and elegant, the touch switch is convenient and durable, the fully electronic control is efficient with interlock and anti pinch function design is humanized, effectively blocking the pollution of particles and bacteria in the air.

The general material composition of the lifting electric transmission window is:

Side frame panel: 1.5mm 304m stainless steel plate

Top and bottom plates: 10mm 304m stainless steel plate

Chamber sealing plate: 1.2mm304m stainless steel plate

Window glass: 6.0mm high transparency organic glass

Working voltage: 220V/50HZ

The motor is a joint venture

Operating instructions for the lifting electric transmission window:

1. Equipped with anti pinch function;

2. Equipped with electronic button switch control;

3. Interlocking function;

4. Built in sterilization ultraviolet lamp with 5 built-in intercom functions, can quickly turn on and off in 3 seconds, effectively blocking bacterial and dust pollution in outdoor air. It only takes three seconds to rise or fall, making it convenient and fast to transfer items. It also has a user-friendly voice interaction system. When the interlock function separates indoor and outdoor *, through this function, indoor and outdoor staff can communicate normally, truly achieving seamless communication between indoor and outdoor. There is a gap of about 1mm between the fixed window and the movable window.

When both windows A and B are closed, users can freely open window A or B, but cannot open window AB at the same time. When one of window A or B is already open, the other window is in a closed state, thus truly achieving indoor and outdoor separation.

Model, size and parameters of lifting electric clean transfer window:

Single door lifting electric transmission window model/specification size and parameters:

Double door lifting electric transmission window model/specification size and parameters: