-
E-mail
252526506@qq.cm
-
Phone
17324818886
-
Address
Mazhai Industrial Park, Erqi District, Zhengzhou City
Product Categories
Henan Aofeida Instrument Equipment Co., Ltd
Large high-temperature box furnace
NegotiableUpdate on 01/22
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Large high-temperature box furnaces are mainly used in research institutions such as universities and industrial and mining enterprise laboratories for sintering diamond grinding wheels, melt analysis, experimental heat treatment, ceramic sintering, etc.
Product Details
1、 Working principle and product usage
Mainly used in research institutions such as universities and industrial and mining enterprise laboratories for sintering, melt analysis, experimental heat treatment, ceramic sintering, etc. of diamond grinding wheels.
IILarge high-temperature box furnaceSpecification Model
Product Model |
longXwideXtall |
voltage/v |
phase number |
temperature/℃ |
power |
SX2-4-10/12 |
300*200*120 |
380 |
3 |
1000/1200 |
4 |
SX2-8-10/12 |
400*250*160 |
380 |
3 |
1000/1200 |
8 |
SX2-12-10/12 |
500*300*200 |
380 |
3 |
1000/1200 |
12 |
SX2-16-10/12 |
600*400*300 |
380 |
3 |
1000/1200 |
16 |
SX2-22-10/12 |
700*400*250 |
380 |
3 |
1000/1200 |
22 |
SX2-18-10/12 |
800*400*200 |
380 |
3 |
1000/1200 |
18 |
SX2-20-10/12 |
500*400*400 |
380 |
3 |
1000/1200 |
20 |
SX2-30-10/12 |
800*500*400 |
380 |
3 |
1000/1200 |
30 |
SX2-36-10/12 |
800*500*500 |
380 |
3 |
1000/1200 |
36 |
IIILarge high-temperature box furnacestructural characteristics
3.1. The furnace shell is made of steel and welded with folded plates, with a double-layer shell structure to ensure the strength of the furnace body, and the surface is sprayed with plastic for a beautiful and elegant appearance.
3.2. The furnace adopts 1500 ℃ vacuum suction filtration formed ceramic fiber board splicing. To ensure the strength of the furnace top fiber board, high-temperature ceramic tube top cross arm lifting is used, and the bottom load-bearing is made of mullite bricks. The heating rate is 0-40 ℃/min, which saves more than 30% energy compared to traditional high alumina integrated furnaces.
3.3. The furnace door is fastened with a screw at the lower part, making it convenient to control the gap between the furnace doors when needed. The outer shell is treated with a beautiful and generous spray coating.
3.4. The heating adopts self winding Shougang resistance wire threaded through high-temperature ceramic tubes placed on both sides and bottom of the furnace, heated on three sides, reasonably and evenly distributed, and the furnace temperature is relatively uniform, which is easy to maintain and replace.
3.4. The bottom is equipped with a furnace bottom plate to protect the heater.
3.5. There are two thermocouple holes, with K-type index thermocouples placed. One is connected to the temperature display meter and placed at the rear of the furnace for separate temperature measurement, while the other is located at the top of the furnace to control the furnace temperature. There is an exhaust hole at the top, equipped with a hole plug, used to remove exhaust gas from the furnace. The side hanging of the distribution box is located on the right side of the electric furnace, and it meets the industrial product safety standards for leakage, phase loss, undervoltage, and overheating protection.
