-
E-mail
ksgj3020200@163.com
-
Phone
13372154386
-
Address
2nd Floor, Building 4, Maoxuan Industrial Park, 299-1 Songjiagang Road, Zhoushi Town, Kunshan City
Kunshan Guojing Electronics Co., Ltd
ksgj3020200@163.com
13372154386
2nd Floor, Building 4, Maoxuan Industrial Park, 299-1 Songjiagang Road, Zhoushi Town, Kunshan City
UV-M03A specificationUV Sensor (replaceable) UV-35 (UV-SN35, UV-SD35) Light exposure 0.001-50mW/c ㎡ 0.001-1999mJ/c ㎡ Repeat operation within ± 1.5% Options UV-25, 42 Sensor, ES-232C cable Extinguishing filter: 1/10, 1/20, 1/50 Size and weight Body 71 (W) × 151 (D) × 29 (H) mm/160g Sensor 35 (W) × 55 (D) × 18 (H) mm/50g
| ||||||||
?Regarding SN and SD typesSN type * is used in ORC's exposure equipment and irradiation device, and is widely used by customers to ensure the continuity of program management.
The SD type is a program that uses semiconductor and liquid crystal substrates, and is compatible with the data measured by other companies' illuminance meters. (In ORC's exposure device, the projection exposure device and the surrounding exposure device of the liquid crystal substrate are applied to the SD type) The use of this new illuminance meter is powerful.
?Regarding SN type and SThe indicated value SN of the type is 39% or more, which is compatible with old SD program data
*Under the same irradiation conditions, when emitting 365nm, a high-pressure mercury lamp is used as the calibration light source for the measurement group: mW/cm2View
The standard accessories are as follows:
1: One UV-M03A host
2: One UV-SN35-M10 photosensitive sensor
3: Sensor connection wire 1.5M each
4:Recorder output wire 1.5M each
5:2 UM-3 batteries
6:One AC adapter JJ-3233
7:Handy Wiper 1 sheet
8:One box
9:One manual
10:One ORC calibration table
11:One ORC test report
Optional accessories:
1: One UV-SN25-M10 sensor and one UV-SN42-M10 sensor
2: Dimming film UV-FL10-M10 (1/10), one UV-FL2-M10 (1/20), one UV-FL5-M10 (1/50)
3: Sensor wire 3M 5M
4: RS232 interface cable 1.5M
5: Certification certificate