Jiangsu, Zhejiang, and Shanghai supply Germany's KUHNAST UV-365A UV illuminance meter

The KUHNAST UV-365A, a new UV intensity tester from Germany in 2014, adopts microcomputer technology and is a highly stable and accurate UV light intensity tester. Its lightweight size and large LCD display screen are beautiful and easy to read, making it very suitable for effective detection of UV light sources in various industries.

In order to achieve strong UV curing effect and accurately determine the time to replace the new lamp, these deviations will occur solely based on human visual observation. Therefore, selecting UV light intensity detection instruments has become even more important.

Application scope:

Especially suitable for industrial UV curing, UV sterilization, medical therapy, fluorescence analysis, UV lithography, water disinfection treatment, biological breeding, UV point light source, surface light source intensity measurement in industries such as health, medical, chemical, electronics, aerospace, etc.

KUHNAST UV-365A can provide scientifically accurate detection data, making it clear whether a new UV lamp needs to be replaced and providing guidance on the correct selection of UV lamp power, optimizing the UV curing process and ultimately achieving cost savings.

Key Features:

Aluminum alloy shell, compact and flexible, can be operated with one hand,

Equipped with a backlit 128 * 64 LCD screen and a beautiful and easy to read human-machine interface,

The probe is designed to be separated from the body, making it easy to replace probes with different spectra,

Automatic memory function, capable of cyclically storing 10 sets of data,

With locking function, it is convenient to record and compare work,

The automatic shutdown function saves power,

Adopting microcomputer technology, high precision and low power consumption

Linear UV detector with good stability and minimal impact from visible light,

Adopting green and environmentally friendly rechargeable lithium-ion batteries,

Comes with a USB standard charging port, which can be directly charged using the computer's USB interface,

Produce calibration according to the NIST transmission standard in the United States.

UV-365A technical parameters:

Spectral range: UV 250-410 nanometers, center wavelength: 365 nanometers,

Resolution: 0.01 mW/cm²(1mW/cm²=1000 uW/cm²)

Range: 0-1999 mW/cm²(milliwatts per square centimeter)

Measurement error: ± 5%

Powered by: 1000 mAh lithium-ion battery

Battery power consumption: approximately 0.1mA

Battery life: Approximately 500 cycles of charging and discharging, with a full charge lasting 60 days of normal use, depending on usage.

Main shell material: aluminum alloy, anodized surface treatment

Dimensions: Square structure, length 120x width 78x height 18mm (millimeters)

Display screen: 1.5 inches (128 * 64 LCD screen+tempered glass)

Photographic probe: diameter: 35mm, height: 16.5mm

Probe cable: standard cable: 1.5 meters, extension cable: 2 meters

Light receiving aperture: Φ 9mm

Sampling time: approximately 0.5 seconds

Data recording: 10 sets of cyclic data

Charging interface: USB (standard charging port)

Net weight of the host: 240g

Net weight of probe: 80g

Operating temperature: 0 to 85 ℃ (Celsius)

Temperature tolerance: Continuous exposure for no more than 20 seconds at 120 ℃ (Celsius)

Verification cycle: Due to the aging of all electronic components such as sensors over time, it is recommended that the verification cycle be one year to ensure measurement accuracy and effectiveness more accurately

Warranty period: Within one year from the date of purchase, except for damages caused by human factors or objective factors

Standard accessories: Host: 1 unit; UVA probe: 1; Charging cable: 1 piece; Instruction manual: 1 copy; Guarantee card: 1 card; Portable case: 1 piece

Optional accessories: UVA, UVB, and UVV probes.

Usage:

1. Firstly, insert the probe connector into the instrument's connection port. If the instrument is in the open state, it will automatically restart, and when it is in the off state, it will proceed to the next step of operation;

2. Press the "NO/OFF" button on the left side of the instrument panel to turn on the device. After entering the system and displaying the brand logo and product serial number, if the values displayed on the LCD screen are MAX 0.000 and CUR 0.000, the test can be performed;

3. Point the detection probe towards the UV light source to be detected, and pay attention to the value during detection, which is not related to the instrument standard, but to the distribution position and power of the UV lamp;

4. As the position of the detection probe varies, corresponding light intensity data will appear on the instrument display screen, such as "100", and the detected light intensity will be considered as 100mw/cm²， MAX will automatically record the maximum value, and if there is no higher value, it will be maintained;

5. The instrument screen will display two sets of data, the maximum value "MAX" and the current value "CUR". If the operator wants to record the current light intensity value of a certain point, simply press the "HOLD" button to lock the light intensity value on the instrument display screen;

6. Press the 'CHANGE' button to retest the next set of data, saving a total of 10 sets of recorded data in a loop,

7. Intelligent shutdown function: automatically turn off the backlight without pressing any buttons or testing information for 10 seconds; If there is no signal for 5 minutes and no button is pressed, the device will automatically shut down; If there is a signal status and the button is not operated for 10 minutes, it will automatically shut down. After shutting down, please put it in the packaging and keep it properly.