JT6323A electronic load

NegotiableUpdate on 01/22

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

JT6323A Electronic Load $r $n Product Introduction: 600W/60A/500V Electronic Load $r $n 600W/60A/500V Electronic Load, 500KHz Synchronous Sampling, Pursuing More Realistic and Faster Load Simulation, Experiencing More Systematic and Higher Frequency Signal Analysis. Realize more cutting-edge, comprehensive, fast, and intelligent detection.

Product Details

JT6323A electronic load
Product Introduction: 600W/60A/500V Electronic Load

600W/60A/500V electronic load, 500KHz synchronous sampling, pursuing more realistic and faster load simulation, experiencing more systematic and high-frequency signal analysis. Realize more cutting-edge, comprehensive, fast, and intelligent detection.

Main features:

support16The synchronous belt load of the platform meets the testing needs of multiple output power supplies.
support16The synchronous parallel operation of the load meets the power expansion needs of a single output power supply.
500KHzsynchronous sampling,10Hz，10uA，0.1mVStable resolution output.
voltage/Current ripple（Vpp/Ipp）Peak value（Vp+/Ip+）Valley value（Vp-/Ip-）Measurement.
There are four basic operating modes: constant current, constant voltage, constant power, and constant resistance.
Supporting authenticityLEDSimulation function.
supportCV/CCSource fixed power/Constant resistance, constant resistance modeCV/CCSource intelligent detection and matching.
Gundam50KHzDynamic load mode（DYNA）,Voltage peaks and valleysVp+TheVp-Measurement.
Support overcurrent protection testing（OCP）And high-power point capture（Pmax）.
Support load effect measurement（Load Effect）
High speed dynamic frequency conversion scanning technology(sweep).
Support time measurement（Timing）.
Support overvoltage protection（OVP）Testing.
Built in waveform generator, inListIn mode, various loaded waveforms can be simulated.
Support short circuit（Short）Simulation function.
Support single machine automatic testing(A-Test),Supports all extension modes and all detection items.
Support battery internal resistance and power level testing（Battery）.
Support remote compensation.
supportVonTheVoffFunction.
Shortcut support20Storage and retrieval of global data.
High brightness full view large screen graphic dot matrix display screen.
overvoltage/overcurrent/Overpower/Overheating protection; Power polarity reverse protection.
Stepless servo and intelligent fan system.
Electrical isolation, externally triggered input/output.
Electrical isolation, standardRS232Interface.
Support current waveform monitoring output.
standardSCPIagreement.

Technical indicators:

model		JT6323A
Rated input	power	600W
	voltage	0~50V	0~500V
	current	0~6A	0~60A
	Operating voltage	2.8V@60A
CC pattern	scope	0~6A	0~60A
	fineness	0.1mA	1mA
	precision	0.03%+0.05%FS
CV pattern	scope	0~50V	0~500V
	fineness	0.5mV	5mV
	precision	0.03%+0.03%FS
CP pattern	scope	600W
	fineness	16Bits
	precision	0.1%+0.1%FS
CR pattern	scope	0.047Ω~50KΩ
	fineness	16Bits
	precision	(0.1+0.02R)%
LEDpattern	bandwidth	100kHzabove
	RdCoefficient range	0.001~1
Dynamic operation mode	scope	10uS~50S
	fineness	2uS
	precision	1uS+20PPM
	slew rate	1.2A/mS~2.4A/uS
Voltage measurement	scope	0~50V	0~500V
	resolution	0.1mV	1mV
	precision	0.02%+0.03%FS
Current measurement	scope	0~6A	0~60A
	resolution	0.01mA	0.1mA
	precision	0.03%+0.05%FS
Ripple measurement	scope	0~50V	0~500V
	bandwidth	10Hz~100kHz
	precision	1mV	10mV