ATA-4315 High Voltage Power Amplifier

ATA-4315 High Voltage Power Amplifier

Channel: Single channel
Voltage: High output voltage of 150Vp-p (± 75Vp)
Current: Large output current of 1Arms
Bandwidth: Bandwidth (-3dB) up to DC~3MHz
Pendulum rate: Pendulum rate 1000V/μ s

Introduction

ATA-4315 is an ideal single channel high-voltage power amplifier that can amplify both AC and DC signals. High output 150Vp-p (± 75Vp) voltage, 105Wp power, can drive high-voltage power type loads. The voltage gain can be adjusted by numerical control, and commonly used settings can be saved with one click, providing you with convenient and concise operation options. It can be used in conjunction with mainstream signal generators to achieve perfect signal amplification.

Input

The input is BNC interface, with two options of input resistance of 50 Ω and 1k Ω, perfectly matching high and low internal resistance signal sources.

outputOutput

The output is a banana socket, with a high output voltage of 150Vp-p (± 75Vp) and an output current of 1Arms.

LCD panel display

The LCD display on the operation panel displays the device status and parameters dynamically, and the interactive interface is clear and easy to understand.

voltagegain

The voltage gain can be adjusted by 0-50 times in numerical control, and is divided into two types: coarse adjustment (1-step) and fine adjustment (0.1 step). Combined with the display of LCD panel gain, it can quickly adjust to the required voltage value.

Monitoring port Monitor

1/100 Monitor: The voltage of this port is 1/100 of the output port, and the monitoring port is a BNC connector that can be directly connected to an oscilloscope for real-time monitoring of the output voltage.