Introduction to self-priming submersible jet aerator

QSB type deepwater self-priming submersible jet aerator

Principle and Application:

The water flow generated by the submersible pump passes through the nozzle to form a high-speed water flow, and negative pressure is formed around the nozzle to suck in air. It mixes with the water flow in the horn shaped diffusion tube through the mixing chamber to produce a water gas mixture flow, which is sprayed out at high speed. The water flow carrying many bubbles vortices and stirs in a large area and depth of water to complete aeration, and its shaft power does not change with the depth of submergence. The intake air volume can be adjusted. Because of this, jet aeration villages can be applied in pools with significant changes in water level.

Features:

This aerator consists of a submersible electric pump and a jet system, which enables simultaneous agitation and oxygenation of the water body, resulting in a high oxygen absorption rate and the advantage of no clogging of the impeller.

Strong unidirectional liquid flow creates effective convective circulation, and the motor load changes very little with the water level, making installation simple.

Applicable working conditions:

4SB type deepwater self-priming submersible jet exposure (the machine can operate continuously under the following conditions:

1. The temperature of the medium does not exceed 40 ℃; 2. The pH value of the medium is 59; 3. The density of the medium does not exceed 1150kg/m

Model representation method:

Selection and installation:

When our company is required to assist in selection, users should provide relevant data such as pool type, medium characteristics, required air intake, and diving depth, so that our company can provide high-quality equipment and better meet the needs of users. The installation forms of QSB type deepwater self-priming submersible jet aerator include two types: self coupling and mobile. Self coupling installation is to fix the aeration device and a dedicated base at the bottom of the water tank, install supporting blocks on the top of the tank, and connect the two with guide rails. After the submersible pump is connected to a specific bracket, it slides down along the guide rail to the outlet position of the base. Through the self weight of the pump, it automatically couples and seals. Self coupling installation can lift and install electric pumps without the need for installation or maintenance personnel to enter the water pit. The mobile installation method is to install the deep water self-priming submersible jet aerator at the bottom of the pool, relying on its own weight bowl position, which has the characteristics of adjustable installation position, flexibility, and low cost.

Factory Direct Supply

supply

Manufacturer's direct supply has high cost-effectiveness

• More than 20 acres of modern factory base and storage center
• Own technical team, fast supply
• Support non-standard customization