Industrial wastewater integrated treatment equipment

The workshop wastewater is discharged into the regulating tank through the grid well, and then lifted by the lifting pump to the integrated treatment equipment. After adjusting the pH in the neutralization tank, it enters the coagulation reaction tank and undergoes PAC and PAM flocculation reactions. It then enters the inclined tube sedimentation tank for sedimentation, and the supernatant enters the biochemical system for treatment. After anaerobic, anoxic, aerobic, and MBR membrane tank processes, it finally enters the clean water tank for standard discharge or deep treatment; The sludge is discharged into the sludge concentration tank, dehydrated by a filter press, and the sludge cake is handed over to a qualified company for recycling and treatment.

Performance Characteristics

1. The process is mature and can effectively remove pollutants such as COD, BOD5, ammonia nitrogen, total phosphorus, suspended solids, etc. It has the characteristics of high removal efficiency, stable effluent meeting standards, and low sludge volume.

2. Small footprint, equipment can be either above ground or underground, energy-saving, and easy to operate and maintain.

3. Fully automatic control, no need for supervision, long equipment service life, low equipment failure rate, waterproof function and high safety of the electrical box.

Scope of Application

All medium and low concentrations (COD ≤ 2000mg/L; BOD5 ≤ 1000mg/L, ammonia nitrogen ≤ 50mg/L); Total phosphorus ≤ 10mg/L; Suspended solids ≤ 200mg/L; Chromaticity ≤ 200 times; Industrial wastewater treatment with pH values ranging from 6 to 9.

Processing technology and product parameters