-
E-mail
Sales@dulinmachine.com
-
Phone
13817824596
-
Address
Room 303, Building 4, No. 26 Hangji Road, Hangtou Town, Pudong New Area, Shanghai
Product Categories
Shanghai Dulin International Trade Co., Ltd
Hydraulic tapping machine RHG-3Bplus (M36)
NegotiableUpdate on 05/17
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Introduction to Gamor Hydraulic Tapping Machine: Metric Standard (Coarse Thread): M2-M36 British Standard Thread (Coarse Thread): BSW 3/32-1 "3/8 British Standard Pipe Thread: BSP 1/16-1" 1/2 Tapping Material Tensile Strength: 120 KG/MM2 Tapping Material Brinell Hardness: HB 352 Tapping Material Rockwell Hardness: HRC 37
Product Details
Gamor hydraulic tapping machine, tapping machine, threading machine M2-M36
 |  |  |
| technical indicators(model): | RHG-3BPlusM2-M36 | MT-3BPlusM2-M36 | MTC-3BPlusM2-M36 |
| Tap capacity(Metric standard coarse teeth): | M2-M36 | M2-M36 | M2-M36 |
| British standard thread(coarse teeth): | BSW 3/32 | BSW 3/32 | BSW 3/32 |
| British standard pipe thread: | BSP 1/16 | BSP 1/16 | BSP 1/16 |
| thread accuracy: | 6H | 6H | 6H |
| Tensile strength of materials that can be attacked: | 120 Kg/mm2 | 120 Kg/mm2 | 120 Kg/mm2 |
| Brinell hardness of materials that can be attacked: | HB 444 | HB 444 | HB 444 |
| Rockwell hardness of materials that can be attacked: | HRC 46 | HRC 46 | HRC 46 |
| Tapping direction: | vertical | vertical/level/Wanxiang at any angle | vertical/level/Wanxiang at any angle |
| 1Low speed gear: | 30-148r.p.m. | 30-148r.p.m. | 30-148r.p.m. |
| 2High speed gear: | 180-890 r.p.m. | 180-890 r.p.m. | 180-890 r.p.m. |
| 1Low speed torque: | 428.87NM | 428.87NM | 428.87NM |
| 2Low speed torque: | 186.31NM | 186.31NM | 186.31NM |
| Hydraulic pressure: | 160 bar(Kg/cm2) | 160 bar(Kg/cm2) | 160 bar(Kg/cm2) |
| variable frequency motor: | 5.5 CV 50Hz | 5.5 CV 50Hz | 5.5 CV 50Hz |
| electricity press: | 380Vthree-phase50Hz | 380Vthree-phase50Hz | 380Vthree-phase50Hz |
| speed control: | Variable frequency drive with stepless speed regulation | Variable frequency drive with stepless speed regulation | Variable frequency drive with stepless speed regulation |
| scope of work(radius): | 1800mm | 1800mm | 1800mm |
| scope of work(diameter): | 3600mm | 3600mm | 3600mm |
| Workbench length, width, and height: | 900X630X | 900X630X | 900X630X |
| Quick change chuck interface diameter: | 48mm | 48mm | 48mm |
| Oil storage capacity: | 50L (liters)ISO VG-46） | 50L (liters)ISO VG-46） | 50L (liters)ISO VG-46） |
| machine device heavy quantity: | 500kg (kilograms) | 520Kg (kg) | 540Kg (kg) |
| RHG-3B PlusM2-M36 |
Standard Configuration: 1 Parallel tapping force arm(3section)Hydraulic motor 2 900*630* 3、Independent speed control key for forward and reverse rotation of tap 4Hydraulic device(hydraulic pump) 5、**Tap torque adjustment valve 6、Digital display for the forward and reverse speed of the tap. 7、Left, right(Forward and Reverse)Tap conversion key 8、High speed and low-speed conversion key. 9、Hydraulic pressure regulating valve(switch). 10、Hydraulic pressure gauge(table). 11、Emergency stop switch. 12、The groove for placing the clamp. 13、Oil temperature display. 14、Hydraulic oil gauge. 15Control key for cooling tap. 16Adjustable height footrest |
 |
| technical indicators(model): | RHG-3BPlus M2-M36 | MT-3BPlus M2-M36 | MTC-3BPlusM2-M36 |
| Atall | 1800mm | 1850mm | 1750mm |
| Blow | 680mm | 680mm | 360mm |
| Crise and fall | 550mm | 600mm | 600mm |
| Dadjust up and down | 190mm | 200mm | 200mm |
| ESliding range | 810mm | 800mm | 800mm |
| FUp and down itinerary | 350mm | 350mm | 350mm |
| HMove up and down | 300 mm | ||
| R1Working range radius(diameter): | 350mm( | 350mm( | 350mm( |
| R2Working range radius(diameter): | 1450mm( | 1450mm( | 1550mm( |
| R3Working range radius(diameter): | 1800mm( | 1800mm( | 1900mm( |
 | |||
 | |||
