High temperature corrosive liquid spray dryer

The high-temperature corrosive liquid spray dryer is applicable to the production of micro particle powder in universities, research institutes and laboratories of food, medicine and chemical enterprises. It is widely applicable to all solutions such as emulsion, suspension, and drying of heat sensitive substances such as biological products, biological pesticides, enzymes, etc. Because the sprayed material only experiences high temperature and instant heating when sprayed into a mist, these active materials maintain their active ingredients unchanged after drying.

　　High temperature corrosive liquid spray dryerThe machine is suitable for producing trace particle powders in universities, research institutes, and laboratories of food, pharmaceutical, and chemical enterprises. It has wide applicability to all solutions such as emulsions and suspensions, and is suitable for drying thermosensitive substances such as biological products, biopesticides, enzyme preparations, etc. Because the sprayed material only experiences high temperature and instant heating when sprayed into a mist, these active materials maintain their active ingredients unchanged after drying.

Specifically used in the following fields: beverages, spices and pigments, milk and egg products, plant and vegetable extracts, pharmaceuticals, synthetic thermosensitive substances, plastics, polymers and resins, aromatic agents, blood products, ceramics and superconductors, biochemical products, dyes, soaps and detergents, food adhesives, oxides, bone powder and tooth powder, etc.

Equipment schematic diagram:

1. Nebulizer; 2. Large clamp; 3. Exhaust pipe; 4. Lock nut; 5. Cyclone separator; 6. No.1 clamp; 7

Collecting bottles; 8. Large clamp; 9. Peristaltic pump; 10. Drying room; 11. Touch screen; 12. No.2 clamp; 13. Power switch;

14. Feed pipe; 15. No. 3 clamp; 16. Collection tube

　　High temperature corrosive liquid spray dryerMain features:

1. Equipped with imported nozzles, high efficiency.

2. Color large touch screen operation, combination of fully automatic control and manual control, Chinese and English panel, parameter LCD display.

3. Real time PID constant temperature control technology, accurate temperature control, heating temperature control accuracy ± 1 ℃.

4. The spray, drying and collecting devices are made of transparent, high-quality, high-temperature resistant high borosilicate glass, and the whole process of spray drying experiment is visible.

5. The atomization structure of two fluid spray is made of high-precision 316 stainless steel. The particle size of the powder sprayed is normally distributed, and the fluidity is good.

6. The jet nozzle automatically clears (passes through the needle) and has an adjustable frequency. When the nozzle is blocked, it will automatically clear to ensure the continuity of the experiment.

7. The feeding amount can be adjusted by the feeding peristaltic pump.

8. Protection function, the fan cannot start and the heater cannot start.

9. Built in oil-free air compressor with a noise level of less than 50db.

10. Equipped with an air inlet filter to ensure sample purity.

11. After drying, the product has uniform particle size, with over 95% of the dry powder in the same particle size.