High precision pneumatic thin film regulating valve with Shanwu locator

NegotiableUpdate on 01/21

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The high-precision pneumatic thin film regulating valve with Shanwu locator and the Tingyang brand ZJHP (M) type pneumatic single seat (sleeve) regulating valve are composed of a pneumatic multi spring thin film actuator and a low flow resistance through single seat valve (sleeve valve). The single seat valve body is directly connected to the single seat cover with a guiding structure, and the valve core is a plunger type structure. Compared with ordinary single seat valves, it has the characteristics of small volume, light weight, and high flow rate, and is suitable for occasions with high flow rate and strict leakage requirements.

Product Details

1High precision pneumatic thin film regulating valve with Shanwu locatorProduct Information:

Product Model: ZJHP (M)
Product Name: Compact Pneumatic Thin Film Single Seat (Sleeve) Regulating Valve
Product features: The ZJHP (M) type pneumatic single seat (sleeve) regulating valve from Tingyang brand is composed of a pneumatic multi spring thin film actuator and a low flow resistance straight through single seat valve (sleeve valve). The single seat valve body is directly connected to the single seat cover with a guide structure, and the valve core is a plunger type structure. Compared with ordinary single seat valves, it has the characteristics of small volume, light weight, and high flow rate, and is suitable for occasions with high flow rate and strict leakage requirements. Compared with ordinary sleeve valves, the ZJHM type precision small sleeve valve has the characteristics of 1/3 smaller volume, 1/3 lighter weight, and 1/3 larger flow rate. It is widely used in industrial process automatic control systems that require low noise and large pressure difference.

IIHigh precision pneumatic thin film regulating valve with Shanwu locatorValve body:

Valve body form: Straight through single seat (sleeve) inverted S-shaped cast valve
Nominal diameter: DN20~300mm
Nominal pressure: PN1.6 4.0 6.4MPa
Connection type: flange type according to JB78-59 JB/T79.2-94 concave type
材料： HT200 ZG230—450 ZG1Cr18Ni9Ti ZG0Cr18Ni12M02Ti
Upper valve cover: room temperature type -20~+200 ℃
Heat dissipation type -40~+450 ℃
Packing: V-shaped polytetrafluoroethylene, flexible graphite, stainless steel corrugated pipe

3、 Valve components:

Valve core type: upper guide single seat (sleeve) plunger type valve core
Flow characteristics: linear characteristics, equal percentage characteristics, or quick opening characteristics
Iculturbed

4、 Flow characteristic diagram:

5、 Executing Agency:

Form: Multi spring thin film actuator gasket: rubber asbestos board, 1Cr18Ni9Ti
Diaphragm material: Nitrile rubber clip reinforced polyester fabric Spring range: 20-100 (40-200, 80-240, 20-60
Compression spring: 60Si2Mn 60-100) KPa
Push rod: 2Cr13 Gas supply pressure: 0.14 0.16 0.28MPa
Membrane cover: A3 Air source connector: Internal thread M10X1
Lining: 2Cr13 Environmental temperature: -30~+70 ℃
Valve action type: gas open type, gas closed type