HONTZ-UV Ultrasonic Vortex Flow Meter

NegotiableUpdate on 05/17

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

HONTZ-UV ultrasonic vortex flowmeter is a new generation of velocity flowmeter product introduced by Shanghai Keyang Technology Co., Ltd. in cooperation with German H ö ntzsch (Hengqi) company. It adopts German electronic technology and achieves precise measurement through ultrasonic high-sensitivity probes, which makes up for the shortcomings of traditional vortex flowmeters in measuring at low flow rates, greatly expands the measurement range, and improves vibration resistance. The plug-in design ensures that the instrument can be used in pipes of different diameters, saving costs. It is mainly used in complex working conditions such as variable composition, wide range, and low flow rate. Large caliber, low flow rate gas has no escape - focusing on large caliber, low flow rate, variable component gas, resistant to dirt and stains

Product Details

Product performance

The flow velocity can be measured at 0.5m/s

Ultra wide range 80:1

Adjustable insertion depth, compatible with a wide range of calibers

Plug in design with minimal pressure loss

Independent power supply, good anti-interference performance

Suitable for applications in explosion-proof working conditions

The measurement results are not affected by the components

As long as the sensor does not clump or wear, gas changes caused by dust and fiber particles will not affect the measurement

Relative gas temperatures below 99% and slight condensation on the sensor will not affect the measurement uncertainty

key parameters

Measurement medium: Suitable for single-phase gas mixtures dominated by air, nitrogen, oxygen, methane, natural gas, ammonia, argon, carbon monoxide, and gases such as biogas

Measurement range: capable of measuring medium flow velocity of 0.5-40m/s

Pipe diameter range: 80-1500mm

Measurement uncertainty: better than ± 1% measurement value+0.03m/s

Repeatability: ± 0.2% measurement value+0.025% FS

Working temperature: -20 ℃ -50 ℃

Medium temperature: -20 ℃ -240 ℃

Work pressure: 3bar/300kPa

Power supply mode: 24V DC

Signal output: 4~20mA

Response time: 120ms

Communication method: Hart, communicate with PC through Hart adapter

Probe material: stainless steel, Hastelloy, titanium, tantalum

Installation method: flange, thread

install

Can be used for horizontal or vertical pipeline installation. If condensation generated on the sensor cannot be avoided, horizontal installation should be used