HEIDON Friction and Wear Testing Machine from Japan

HEIDON Friction and Wear Testing Machine from Japan

TYPE:40

purpose

Friction and Wear Test of New Materials

Evaluate various lubricating materials

Assessment of paper, film, and plastic

Friction, wear, and scratch testing of various coatings

Real time monitoring of changes in frictional resistance

The repeated running friction, which can cause changes in the surface state, peeling of the coating, etc., is calculated based on the increase and decrease of frictional resistance.

Technical Features

1. NewThe developed orthogonal balanced beam method can achieve higher measurement accuracy

2. Y-axis displacement table

3. Friction and Wear Analysis and Operation Software

4. Large reversible acrylic cover/sealing function

Main specifications

The application meets the following standards

The pencil holder (purchased separately) can meet the following testing conditions.

JIS K 5600: Test load of 750 g, moving speed of 30 mm/min to 60 mm/min, moving distance of 7 mm or more

The use of ASTM flat indenter (standard configuration) can meet the following testing conditions.

ASTM D 1894: Test load of 200 g, travel speed of 100 mm/min, travel distance of 60 mm or more JISK

7125: Test load of 200 g, travel speed of 100 mm/min, travel distance of 60 mm or more

JIS P 8147: Test load of 880 ± 240 g, moving speed of 10 mm/min, moving distance of 60 mm or more

Measurement range: Load sensor capacity: 9.807 N

When the capacity of each load sensor reaches its maximum value, the digital multimeter FLUKE 8808A will automatically adjust the output value to 5.00 V, with a qualified range of 4.97 V to 5.03V