German energy meter UV integrator 140

German energy meter UV integrator 140

UV-Integrator140

BELTRON, Germany

Original from Germany! Original brand!

The German UV energy meter is an instrument used to measure the UV energy of exposure devices. The main sensor of the measuring instrument is located on the back of the measuring instrument, with a measurement range of 250-410 nanometers. The measurement can be directly displayed on the display screen on the front of the UV energy meter (unit: millijoules per square centimeter). The power supply of this UV energy meter is a 3.6V lithium battery, which can last for about 10000 hours due to the use of a special energy-saving circuit.

Technical data:

German UV energy meter (UV integrator 140)

Size: Diameter 140mm * Height 13mm

Weight: Approximately 450g

Applicable equipment: UV drying machine, exposure machine

Measurement range: 0-5000mW/cm2

Energy display: LCD 0-99999mj/cm2

Power supply: Lithium battery 3.6V

Measurement range: 250-410nm (spectral wavelength)

Power consumption: approximately 10000 hours (Lithium battery)

Working temperature (℃): 0-70 ℃

The UV energy meter can withstand a temperature of 110 ℃ on the conveyor belt for no more than 10 seconds

Usage/Operation:

a. Turn on the ON switch, and the LCD (display screen) will show zero.

b. Place the UV energy meter near the exposure UV light source with its back facing the light source (the energy sensor of the UV energy meter is on the back).

c. Until there is a measurement display on the screen of the UV energy meter, such as 800 millijoules per square centimeter. (800mj/cm2)。

d. Record the values on the display screen or use them as quality control and experimental parameters, and turn off the UV energy meter switch (OFF).