Friction of conveyor belt drum

SGM-02B typeFriction of conveyor belt drumtesting machine

1. Overview:

This machine complies with GB/T7986-1997《Friction of conveyor belt drumThe testing and inspection requirements of the "Test Methods" standard and relevant standards such as MT450-1995 and MT914-2008. This machine is suitable for drum friction testing of fabric core flame retardant conveyor belts and other flame retardant conveyor belts. This testing machine adopts an intelligent adjustable tension testing device, which improves the drawbacks of the previous lever tension device in the testing process, such as the unstable tension force due to the elongation of the friction tape and the cumbersome operation of the weight tension device during the testing process. It truly achieves fully enclosed intelligent control of the entire testing process. The user unit should ensure the reliability and continuity of the test results by implementing standardized management of the equipment.

2、 Technical parameters:

1. Overall power: 11.5KW

2. Power supply: AC380V 50Hz three-phase five wire system

3. Temperature measurement range: Room temperature -400 ℃ Automatic over temperature detection and shutdown

3.1 Temperature measurement accuracy: ± 1 ℃

3.2 Temperature sensors: Three, (one practical and two spare)

4. Automatic strip breakage detection

5. Automatically record the test time

Test time recording range: 0-99h99min

6. Drum motor power: 11KW

7. Drum load speed: 200 ± 5r/min

8. Apply tension force: The electric automatic application pulls the lead screw, with a range of 343N-2000N and not exceeding 2000N.

9. Wind speed: 2.0 ± 0.1m/s

10. Dimensions: a. Mechanical cabinet 1400 * 860 * 1900mm b. Electrical control cabinet 1500 * 760 * 1700mm

11. Weight: Approximately 900kg