Flushing test device

NegotiableUpdate on 02/21

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

【 Compliant with Standard 】◇ GB4208 【 Product Usage 】 This product is suitable for external lighting and signal devices, as well as protection of automotive lamp housings

Product Details

【 Compliant with standards 】
◇ GB4208

This product is suitable for external lighting and signal devices, as well as for protecting the outer shell of automotive lighting fixtures.

Made of PP board or stainless steel board.
Control System
Adjust the pressure with a flow meter.
Equipped with a water filter.
[Specifications and Technical Parameters]

performance metrics	Inner diameter of nozzle	Φ6.3mm	Φ12.5 mm
	water flow rate	12.5±0.625L/min	100±5 L/min
	water pressure	Adjust water flow according to regulations
	The central part of the main water flow	Leaving the nozzle2.5mThe diameter is approximately40mmThe Circle	Leaving the nozzle2.5mThe diameter is approximately120 mmThe Circle
	Test time	less3 min
	Distance from nozzle to shell surface	2.5～3 m
Operation control system	Water tank material	PPBoard making
	controller	Digital programmable controller, frequency modulation transformer
	water supply system	water storage tank booster pump
Standard Configuration	The experimental device consists of a water storage tank, a pressurized water pump, a pressure regulating valve, a flow regulator, a pressure gauge, a water pipe, a diversion device, a spray bracket, an electrical control box, etc
protection system	Leakage, short circuit, motor overheating