FDU90... FDU95 E+H ultrasonic level sensor*

E+H ultrasonic level sensorApplication:

The Prosonic FMU 90/95 ultrasonic transmitter is used in conjunction with the Prosonic FDU 91/91F/92/93/95/96 series sensors.

FMU90 is equipped with 1 or 2 ultrasonic probes, while FMU95 is equipped with 5 or 10 ultrasonic probes.

Zui has a large range of 70 meters

Can perform limit measurement (with up to 6 relays)

Multi stage pump control (interactive), barrier control

It can measure the flow rate of the medium in open channels and measuring weirs

E+H ultrasonic level sensorPerformance and advantages:

The transmitter can be used in the field or control room

There is a Chinese operating interface

Correction of ultrasonic operating time through built-in or external sensors.

The provided "TOF Tool FeldTool Package" operating software enables users to easily debug instruments.

The commonly used channel/weir flow measurement linearization table has been pre-set, and users can freely choose.

Calculate the flow rate of the medium in the canal/weir online through an integrated flow curve.

System integration through HART or PROFIBUS DP.

Automatic recognition of FDU 9x series probes

Can be used in conjunction with FDU8x series probes

A non-contact probe for continuous measurement of material level and flow rate, suitable for explosive hazardous areas

The Prosonic FDU series consists of nine types of probes with different measurement ranges, which perform continuous, non-contact measurements of level and flow rate.

FDU 91，91F

Liquid measurement range: 10m (16ft)

Solid measurement range: 5m (6.5ft)

FDU 92，92F

Liquid measurement range: 20m (32ft)

Solid measurement range: 10m (16ft)

FDU 93

Liquid measurement range: 25m (65ft)

Solid measurement range: 15m (33ft)

FDU95

Solid measurement range: 45m (147ft)

FDU 96

Solid measurement range: 70m (230ft)

The tested medium can be corrosive liquids such as acids and alkalis, or powders and solid blocks such as grains, coal, ore, and gravel.

E+H ultrasonic level sensorAdvantages and Characteristics:

The complete probe series can complete non-contact continuous measurement of level and flow.

Can be applied to level or flow measurement of open channels, weirs, tanks, and storage tanks.

Anti scaling and adhesion.

An integrated heater can be selected to prevent the probe surface from freezing.

The integrated temperature probe is used to compensate for temperature changes during the operation time of ultrasonic waves.

It can be conveniently installed with flanges or threads (using a sliding Frank for flush installation).

Submersible type (IP68).

For more detailed information, please click:E+H Ultrasonic Level Sensor Series Products.