E+H ultrasonic level gauge FMU40... FMU43 in stock

E+H ultrasonic level gaugeProduct application:

Continuous non-contact level measurement, suitable for measuring liquids, slurries, and coarse materials
Flow measurement in open channels and weirs
System integration through HART (4... 20mA), PROFIBUS PA, or Foundation fieldbus
Maximum measurement range:
FMU 40
Solid measurement range: 2m
Liquid measurement range: 5m
FMU 41
Solid measurement range: 3.5m
Liquid measurement range: 8m
FMU 42
Solid measurement range: 5m
Liquid measurement range: 10m
FMU 43
Solid measurement range: 7m
Liquid measurement range: 15m

E+H ultrasonic level gaugeProduct performance

The menu guides on-site operations and displays four lines of text
On site display of envelope for diagnosis
Comes with ToF Tool operation software for operation and diagnosis
Rotating IP68 aluminum casing
Can be remotely operated and displayed
The process connection has G1 half or 1 half NPT threaded connection
The internally integrated temperature sensor can compensate for temperature changes during ultrasonic operation time to achieve accurate measurement
Linearization of measurement values (up to 32 points), units can be length, flow rate, or flow velocity
Non contact measurement, unaffected by the characteristics of the medium.

E+H ultrasonic level gaugePrecautions for:

The correct selection of liquid level gauge is necessary to ensure its better use. What type of liquid level gauge should be selected based on the physical and chemical properties of the measured fluid medium? What are the diameter, flow range, lining material, electrode material, and output current of the liquid level gauge? Can adapt to the properties of the measured fluid and the requirements of flow measurement.
1. Precision functional inspection
The accuracy level and function of the instrument are selected based on measurement requirements and usage scenarios to achieve cost-effectiveness. For example, in situations such as trade settlement, product handover, and energy measurement, higher accuracy levels such as 1.0, 0.5, or higher should be selected; For process control applications, choose different accuracy levels according to control requirements; In some cases where only the process flow rate needs to be detected without precise control and measurement, a slightly lower accuracy level, such as 1.5, 2.5, or even 4.0, can be selected. In this case, a low-cost plug-in level gauge can be used.
2. Measurable medium
When measuring medium flow rate, instrument range, and caliber for general medium measurement, the full flow rate of the level gauge can be selected within the range of 0.5-12m/s for measuring medium flow rate, which is relatively wide. The selection of instrument specifications (caliber) may not necessarily be the same as the process pipeline, and should be determined based on whether the measured flow range is within the flow rate range. That is, when the pipeline flow rate is too low to meet the requirements of the flow instrument or the measurement accuracy cannot be guaranteed at this flow rate, the instrument port diameter needs to be reduced to increase the flow rate inside the pipeline and obtain satisfactory measurement results.

For more detailed information, please click:E+H Ultrasonic Level Gauge Series Products.