Ex vivo tissue bath (muscle tension measurement) system

TOBS1800The ex vivo tissue bath is used forMeasurement of smooth muscle tension in the gastrointestinal tract, blood vessels, and tracheaThe equipment. This system was independently designed by Beijing Metalworking Hongtai Technology Co., Ltd. and has received * protection. The system adopts *Independent electric heating and temperature control for each channelMethod: No need for an external circulating water bath, compact structure, easy operation, and convenient cleaning，Can be used for dynamic studies of tissues including blood vessels, smooth muscles, myocardium, coronary arteries, large intestine, etc.

1. Electric thermal insulation：Each bath position has an electric heating element, which heats up quickly and controls temperature accurately. Compared with similar products, this system does not require an external circulating water bath, greatly saving experimental space; And it avoids the problem of scale formation in the interlayer of the bath.
2. Independent temperature control:Each bath can be set with different temperatures; Unused channels can also be closed.
3. Convenient to remove bath:Plug and play transparent acrylic bath,There is no pipeline interconnection between the bathtubs, it can be used by inserting it into the fixed socket. Loosen the hand screw and it can be easily removed at any time for cleaning or replacing baths of different volumes.
4. Flexible and convenient micro operations:Three dimensional micro operation can be adjusted up, down, left, right, etc.The hanging and pre adjustment of specimens are carried out outside the bath, making it easy to operate. The suspended specimen can be immersed into the bath as a whole through micro manipulation. The positioning ring can fix the commonly used position of micro operation without the need for adjustment every time.
5. Automatic liquid addition:The solution automatically flows into the bath through the three-way valve at the bottom of the bath, and the volume of the solution can be adjusted according to the bath scale.
6. Automatic drainage:Waste liquid can flow into the waste liquid collection tank below through a three-way valve, and then into the waste liquid tank through the waste liquid collection tank.
7. Automatic fluid change:The side of the bath is equipped with an overflow port. When changing the solution, the inlet valve can be opened directly for pouring. After the solution fills the bath, it will automatically flow out from the overflow port into the waste liquid tank, achieving automatic solution replacement or automatic cleaning of the bath.
8. Gas supply:The vertical hook of the fixed specimen has an air inlet, through which the experimental gas can enter the solution. Bubbles rise from the other side of the specimen without disturbing it. The micro needle valve can accurately adjust the size of the airflow.
9. Easy to clean:After the experiment is completed, simply loosen the hand screw to remove the bath for easy cleaning and to prevent drug residue from affecting subsequent experiments

Main technical parameters

1. Bath capacity:5The10The20mlEquipped with scale markings, three-way valve and overflow port. It can also be customized according to needs.
2. Temperature control method: electric heating; Each channel has independent temperature control. Temperature control range: room temperature-60℃； temperature control accuracy0.1℃； Large temperature wave±0.3℃。
3. Micro manipulation adjustment: 3D micro manipulation; Fine tuning range0-15mmFine tune resolution0.01mm.
4. Single group (unit)4One channel, can be installed simultaneously4An organization.
5. power supply220VAC/50HZ, Power:80W
6. Overall dimensions:55*25*50CM（W*D*H）

• Base with electric constant temperature and oxygen control valve
• Four channel thermostat
• Transparent acrylic bath (multiple specifications to choose from)
• Three dimensional adjustment micro operation
• liquid storage bottle
• Transducers (optional)