Electric power digital display instrument and electric power intelligent instrument.

HK15V-3X1 HK15A-5X1Electric power digital display instrument, electric power intelligent instrument

● Rated current: AC 1A, AC 5A, ● Operating temperature: -10 ℃~+55 ℃, ● Current: 1.2 times (continuous), 10 times/5 seconds (instantaneous), ● Overload: Voltage: 1.2 times (continuous), 2 times/1 second (instantaneous), ● Power factor: 0.5 level, ● Power consumption:<4VA, ● Wiring method: three-phase four wire, three-phase three wire, single-phase, ● Operating range: AC/DC: 80V~270V, ● Storage temperature: -25 ℃~+70 ℃, ● Reactive power: 0.5 level, ● Current: 0.2 level, ● Current harmonics: 0.5%, ● Baud rate: 2400~19200bps, default 9600 bps, ● Current:<20mm Ω, ● Frequency: 45-65Hz

14. Switch input module (optional configuration): Optional 4-channel switch status input monitoring and remote signaling
33. Optional 1-way leakage monitoring
16. Easy installation, simple wiring, and small engineering quantity
15. Power pulse output: 1 active power pulse output, 1 reactive power pulse output
5. The menu is intuitive and the button operation is simple
24. Timed meter reading for time-sharing electricity
12. Suitable for complete monitoring and management of electrical parameters in various incoming circuits and large capacity distribution circuits
23. Multi rate electricity statistics, with 4 different rates for 12 time periods
34. Wide range AC/DC universal power supply: AC/DC 80V~270V
6. Programmable current and voltage conversion ratio
2. Positive and negative active/reactive energy metering, and high demand statistics
11. Complete the networking of various communication software in SCADA and PLC
26. Measure the 2-63rd harmonic components and total harmonic content (THD) of voltage and current
21. High precision measurement of electrical parameters such as three-phase voltage, three-phase current, active power, reactive power, apparent power, power factor, frequency, etc
20. Function optimization, high cost-effectiveness, as shown in the above picture*
13. Switch output module (optional configuration): Optional 4-channel switch output, programmable automatic or remote control switch output
3. Measure the 2-32nd harmonic components and total harmonic content (T) of voltage and current
17. Can complete networking of various communication software in SCADA and PLC

The multifunctional power meter can measure all commonly used electrical parameters in a three-phase power grid system with high accuracy, including three-phase voltage, three-phase current, active power, reactive power, power factor, grid frequency, active energy, reactive energy, and is equipped with communication interface and power pulse output function
Intelligent three-phase current voltage frequency combination meter, can directly measure and display AC voltage: 0-500V; can directly measure and display AC current: 0-5A; frequency measurement display range: 45-65Hz; can be equipped with transformers, and the transformation ratio can be set arbitrarily.
Power Quality, in a general sense, refers to high-quality power supply, including voltage quality, current quality, power supply quality, and electricity consumption quality.
A multifunctional energy meter refers to an energy meter that not only measures active (reactive) power, but also has two or more functions such as time-sharing and measuring demand, and can display, store, and output data.