Ampere meter, multifunctional electrical instrument.

SD48-AIZ SD72-AIZMulti functional ammeter and power multifunctional instrument

● Reactive power: Level 1, ● Relative humidity: ≤ 93%, non corrosive gas environment, ● Voltage: Level 0.2, ● Current harmonics: 0.5%, ● Wiring method: three-phase four wire, three-phase three wire, single-phase, ● Current:<20m Ω, ● Power pulse output: 2-channel power pulse output, ● Impedance: Voltage:>300k Ω, ● Operating range: AC/DC: 80V~270V, ● Power consumption: Voltage:<1VA/phase, ● Power consumption:<4VA, ● Frequency: 45~65Hz, ● Operating temperature: -10 ℃~+55 ℃, ● Rated current: AC 1A, AC 5A, ● Communication interface: 1-channel RS-485 communication, Modbus communication - RTU protocol

9. Easy installation, simple wiring, and small engineering quantity
35. It can display the vector diagram of the measured voltage and current, and users can analyze the vector diagram to determine whether the wiring of the measuring equipment is correct or not
1. High precision measurement of electrical parameters such as voltage, current, active power, reactive power, apparent power, power factor, frequency, etc
10. Wide range AC/DC universal power supply: AC/DC 80V~270V
12. Suitable for complete monitoring and management of electrical parameters in various incoming circuits and large capacity distribution circuits
20. Function optimization, high cost-effectiveness, as shown in the above picture*
31. Supports switch input, switch output, analog transmission output, and power pulse output
21. High precision measurement of electrical parameters such as three-phase voltage, three-phase current, active power, reactive power, apparent power, power factor, frequency, etc
23. Multi rate electricity statistics, with 4 different rates for 12 time periods
17. Can complete networking of various communication software in SCADA and PLC
22. Positive and negative active/reactive energy measurement and high demand statistics
24. Timed meter reading for time-sharing electricity
32. Optional 1 Ethernet interface
14. Switch input module (optional configuration): Optional 4-channel switch status input monitoring and remote signaling
25.12 months of historical energy data storage
26. Measure the 2-63rd harmonic components and total harmonic content (THD) of voltage and current
11. Complete the networking of various communication software in SCADA and PLC
6. Programmable current and voltage conversion ratio

● Equipped with measurement and metering functions, configured with power pulse output and communication interfaces; On the basis of conventional functions, the PZ568Z series adds functions such as DC transmission output, switch input monitoring, relay output, etc; There are four external dimensions to choose from for the product, with frame sizes of 120 × 120, 96 × 96, 80 × 80, and 72 × 72 (mm).
Widely used for measuring and displaying three-phase three wire or three-phase four wire voltage or three-phase current parameters of various instruments and electromechanical equipment, it is an updated product of various pointer gauges
Multi functional power meters are high-precision, highly reliable, and cost-effective intelligent distribution instrument products designed for applications such as power monitoring, intelligent control, and measurement assessment in power systems, industrial and mining enterprises, public facilities, and intelligent buildings. This series of instruments adopts high-precision metering chips and highly reliable MCU design, which can simultaneously measure all commonly used power parameters in three-phase power grids: three-phase voltage (phase/line), three-phase current, active power, reactive power, power factor, grid frequency, UlPQ demand, and bidirectional energy metering. It has standard energy pulse output and RS485 communication interface, and can choose multiple expansion function modules. This series of products has a high cost performance ratio and can directly replace conventional power transmitters, measuring indicators, energy meters, and related auxiliary units.
Intelligent multifunctional power meters have functions such as programmability, automated measurement, LCD display, energy accumulation, harmonic measurement, event recording, input and output, digital communication, etc. The product adopts * microprocessor and digital signal processing technology, integrating digitization, intelligence, and networking. It has high performance, measurement accuracy, beautiful appearance, and strong electromagnetic compatibility, which can replace traditional analog and digital instruments. At the same time, it can be used as a terminal component of the power monitoring system to achieve remote data acquisition and monitoring.