DZ30-32 miniature circuit breaker (DPN phase line+neutral line)

DZ30-32(DPN) "Phase line+neutral line"Circuit breakerSuitable for single-phase residential power lines with AC frequency of 50Hz or 60Hz and rated voltage of 230V, to protect against overload and short circuit of electrical circuits. Simultaneously cutting off the live and neutral wires eliminates the risk of faults and fires caused by the reverse connection of the live and neutral wires or the grounding potential of the neutral wire. It is currently the most ideal distribution protection switch in the civilian residential field.
This product complies with IEC60898-1 and GB10963.1 standards.
DZ30-32 produced by Taiximiniature circuit breakerThe DPN circuit breaker has passed the national CCC certification.

Rated current: 6,10,16,20,25,32A.
■ Impulse withstand voltage: 4kV.
Mechanical lifespan: 10000 cycles.
Electrical lifespan: 4000 cycles.
■ Operating ambient temperature: The ambient temperature is -5 ℃ to+40 ℃, and the average temperature within 24 hours does not exceed 35 ℃.
■ Altitude: ≤ 2000m.
Compliant with standard: IEC60898-1/GB10963. one
Compliant with certification: CCC certification.
■ Tripping Characteristics: Protects conventional loads and distribution cables, with an instantaneous tripping range of (5-10) In.
Installation method: TH35-7.5 installation rail is used for installation. The product is directly installed with a neutral wire to avoid potential electric shock hazards caused by incorrect neutral wire wiring.

The DZ30 series DPN circuit breaker has high breaking capacity, small size, and compact structural dimensions. Within the width of one module (18mm) at both poles, it has two poles (P+N) and can simultaneously cut off the phase and N lines. The N line has the advantage of being connected first and then disconnected, eliminating the risk of personal injury caused by the reverse connection of the phase and N lines or the ground voltage of the N line. Using wire connection method, it can connect up to 10nm ² round copper wire.
Install the guide rail using TH35-7.5 standard steel.

The DZ30 circuit breaker has a small volume and compact structure, with 1P+N poles within a width of 18MM, which is half the width of the DZ47 two pole product, and its price is better than similar products.
The DZ30 circuit breaker housing and some functional components are made of high flame retardant, high temperature resistant, and impact resistant plastic.
DZ30 products are directly installed with a neutral wire to avoid potential electric shock hazards caused by incorrect neutral wire wiring.
DZ30 miniature circuit breaker adopts rail installation, which is convenient and time-saving.

Wiring: DZ30 (DPN) is suitable for connecting wires of 10mm ² and below. The wiring method is to tighten the wires with screws.