DC-1030 Cycle Meter Refrigerator Model*

DC-1030 Cycle Meter Refrigerator Model*Scope of use:

Hot oneCirculating refrigeration machineSuitable for precise constant temperature direct heating and auxiliary heating in biology, chemistry, physics, plants, chemical engineering and other scientific fieldsUse it.

DC-1030 Cycle Meter Refrigerator Model*structure

Circulating refrigeration machineThe structure is a metal rectangle, carefully crafted with cold-rolled steel plates for the outer shell, stainless steel inner liner, and digital displayLCD liquid crystalTemperature Controller,PID control, PT100 sensor,The power supply and water pump are both installed in the control box.

Main technical parameters:

Power supply voltage: AC220V ± 10% Heating power: 1000W

Temperature control range: -10-100℃ Temperature control accuracy: ± 01℃Timing range: 0-99.99 hours or normally open

Temperature uniformity:±0.1℃ sink size: 400x325x200mm

Opening size: 310x280mmTemperature resolution:0.01℃Circulating pump flow rate: 6L/min

four、Circulating refrigeration machineUsage:

Before use, please carefully read the instructions, familiarize yourself with the instrument and control panel, and use a megohmmeter to measure whether there is poor insulation or short circuit in the power supply, plug, and grounding. Set the experimental temperature according to the temperature setting method, and once the temperature remains constant, the experiment can begin. This constant temperature heating solution uses distilled water and prohibits the use of river water and hard water. If tap water is used, the constant temperature pot should be cleaned after each use to prevent the accumulation of scale on the heater from affecting the sensitivity of the constant temperature.When the temperature is below zero degrees, please choose industrial alcohol as the refrigerant liquid.

five、Circulating refrigeration machineSet temperature:

pressSETThe key can be used to set or view the temperature setpoint. pressSETThe characters on the keyboard and digital display start flashing,Indicates that the instrument has entered the set state,Press the △ key to increase the set value, press the ▽ key to decrease the set value, and long press the △ or ▽ key to quickly change the data, Press againSETAfter the temperature setting is completed and the key instrument returns to normal working state, the heating and circulation pump switch can be turned on.If the temperature controller is intelligent, a separate temperature control manual should be attached.

six、Circulating refrigeration machinerepair:

When repairing the regulator and replacing the heating tube, simply remove the cover plate on the controller to replace it. The electrical part should be repaired by professional personnel or returned to our factory for repair.

Our products come with a one-year warranty and lifetime maintenance from the date of manufacture.