Convenient casting type high-speed submersible mixer, underwater thruster

Convenient submersible mixing machineIt can be divided into two main series: mixed stirring and low-speed push flow.

The mixing series mixer is suitable for mixing liquids containing suspended solids in sewage treatment plants and industrial processes;

The low-speed push flow series mixer is suitable for aeration tanks in industrial and urban sewage treatment plants. It produces strong water flow with low tangential flow, which can be used for circulation, nitrification, denitrification, and phosphorus removal stages to create water flow.

Convenient submersible mixing machineStructure Introduction and Performance Characteristics:

1. The submersible mixer has a compact structure, small volume, and light weight. Simple operation and maintenance, easy installation, and long service life.
The blades of the submersible mixer have self-cleaning function, which can prevent foreign objects from entangling and blocking.
3. The combination of a submersible mixer and an aeration system can significantly reduce energy consumption, increase oxygen filling capacity, and effectively prevent sedimentation.
4. The motor winding of the submersible mixer is insulated to Class F with a protection level of IP68. It uses maintenance free bearings with one-time lubrication and has functions such as oil chamber leakage detection and motor winding overheating protection, making the operation of the motor safer and more reliable.
5. The friction material of the mechanical seal of the submersible mixer is corrosion-resistant tungsten carbide, and all fasteners are made of standard stainless steel material.

How to install a submersible mixer system:

The installation system of the submersible mixer can quickly install and disassemble the submersible mixer without the need to discharge sewage from the pool.

When the pool depth H is less than 4 meters, it is recommended to use installation system one. The diving depth of the submersible mixer can be adjusted vertically as needed, and the lifting system base, support frame, and lower bracket, which can rotate around the guide rod at a large angle of plus or minus 60 degrees within the horizontal range, are fixed with expansion bolts on the relevant connection surfaces with the pool, without the need for reserved holes. The installation system uses a guiding steel rope guide rod, which has the characteristics of convenient transportation and simple on-site installation. This system fundamentally avoids the situation of guide rod bending and deformation caused by transportation, which affects normal use, and effectively improves the phenomenon of inability to lift normally due to installation errors of guide rods when the pool is too deep. Under the installation conditions of a cantilevered pool roof, it appears more convenient and reliable to operate.

Factory Direct Supply

supply

Manufacturer's direct supply has high cost-effectiveness

• More than 20 acres of modern factory base and storage center
• Own technical team, fast supply
• Support non-standard customization