Condensation recovery spray dryer

Condensation recovery spray dryer should be suitable for research and development and production of micro particle powder in universities, research institutes, food, biology, beverage, chemical industry, materials, pharmaceutical and other enterprise laboratories. It has broad spectrum applicability for all solutions such as emulsion and suspension, and is suitable for drying heat sensitive substances such as biological products, biological pesticides, enzymes, etc

　　Condensation recovery spray dryerIt is mainly suitable for the research and production of trace particle powders in universities, research institutes, and laboratories of food, biology, beverage, chemical, material, pharmaceutical and other enterprises. It has broad-spectrum applicability to all solutions such as emulsions and suspensions, and is suitable for drying thermosensitive substances such as biological products, biopesticides, enzyme preparations, etc. Because the sprayed material is only subjected to high temperature when sprayed into mist like particles, it is only heated instantly and can maintain the active ingredients of these active materials without damage after drying.

Application fields of HZ-1500 spray dryer: beverages, spices and pigments, milk and egg products, plant and vegetable extracts, pharmaceutical synthesis, thermosensitive plastics, polymers and resins, aromatics, blood products, ceramics and superconductors, biochemical products, dyes, chemical materials, soaps and detergents, food adhesives, oxides, bone powder and tooth powder, etc.

　　Condensation recovery spray dryerCharacteristics:

1. The spray, drying chamber and collection device are made of transparent, high-quality, high temperature resistant and high borosilicate glass, so that the spray drying process can be carried out in a pollution-free and stable environment. The whole process of spray drying experiment can be seen, which is convenient for controlling the experiment process and finding and adjusting problems in time. All glass components are easy to disassemble and clean.

2. Equipped with an imported oil-free air compressor, the particle size of the powder sprayed follows a normal distribution, with good fluidity and very low noise, less than 60db, which meets the national laboratory noise standards

3. The atomization structure of the two fluid spray is made of high-quality and high-precision 316 stainless steel material, with uniform atomization.

4. The temperature control adopts real-time PID constant temperature control technology, ensuring accurate temperature control.

5. The feeding amount can be adjusted by a peristaltic pump, and even with less than 30ml of sample, one experiment can be completed.

6. The jet nozzle automatically clears (passes through the needle) and the frequency can be adjusted. When the nozzle is blocked, it will automatically clear to ensure the continuity of the experiment.

7. Eat it all

8. It has a protective function. If the fan does not start, the heater cannot start.

9. The dried finished dry powder has a relatively uniform particle size, with over 95% of the dry powder within the same particle size range.

10. It can be used immediately after being powered on, without the need for any auxiliary facilities. Our equipment comes with a one-year warranty. If any parts are damaged, we do not charge for repairs, only for the replacement of the parts. The prices we quote include shipping costs.