Cannon silicon bath oil from the United States

Cannon silicon bath oil from the United States

1. Viscometer: After calibration, the viscosity measured by the glass capillary tube can meet the required retest accuracy and retest accuracy.
2. Viscometer bracket: It can firmly hold the viscometer in a constant temperature bath and make it stand vertically.
3. Viscometer temperature regulating tank: It contains a transparent liquid that can keep the sample below the liquid level by less than 20mm or above the bottom of the tank by more than 20mm, and can maintain the temperature change in the tank between 15 and 100 ℃ below ± 0.02 ℃. Outside this temperature range, the temperature change does not exceed ± 0.05 ℃.
4. Thermostat: Check that the thermometer of the dynamic viscosity meter contains appropriate liquid to meet the temperature range. The thermometer needs to be calibrated before use, and the accuracy after calibration is ± 0.02 ℃. If other thermometers have the above accuracy, they can also be used.
5. Timer: A stopwatch or a spring device timer can be used, but its scale should be at least 0.1 seconds, and its measurement error from 200 seconds to 900 seconds should be within ± 0.07%.

Cannon viscosity standard oil from the United States
Scope of application:
Measurement method for kinematic viscosity of transparent and opaque liquids (including calculation of dynamic viscosity)
Applicable standard solution for calibrating viscometers.
General Purpose Viscosity Standards
High viscosity standards
Low Temperature Standard Viscosity Liquid
CCS Viscosity Standards
CMRV Viscosity Standards
Viscosity Cup Standards
High Temperature Standard Liquid
THOMAS-STORMER's standard solution (Stormer Standards)
Silicone Viscosity Standards
Viscosity Oil Standards

Cannon silicon bath oil from the United States