Cable identification device*

NegotiableUpdate on 01/23

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Cable identification instrument * is a type of identification instrument developed according to the needs of the power industry. Used in the installation, relocation, maintenance, and troubleshooting of power cables to determine the operational status of the cables (i.e., to distinguish whether the cables are running live or shut down); Identify the cable to be searched for in the power outage cable.

Product Details

Product Introduction
Cable identification device*It has the characteristics of accurate and fast discrimination of cables, simple operation of surface roughness samples, and wide application range. It is a new type of cable identification instrument with advanced technology and performance in China. The cable identification device consists of a signal generator, a receiving clamp signal detector, and an indicator meter. The signal generator mainly generates a special pulse modulation signal, which is applied to the tested cable that has stopped running through the output line. The receiving clamp is used to search for the tested cable on site. When the receiving clamp detector detects a special signal applied to the cable, the pointer of the electric meter on the signal detector swings synchronously with the frequency of the applied signal, while the signals detected on other cable lines are much smaller and in the opposite direction. By indicating the amplitude and direction through the electric meter, it is easy to determine the tested cable. When used in conjunction with a signal generator, the receiving clamp signal detector can be used to distinguish the live state of cables or assist in finding the location of cable short circuits. When using the receiving clamp signal detector, the clamp should be used to clamp the cable.
Application scope:
Suitable for identifying power outages in various types of cables; Identify the cable to be searched for; It is particularly convenient for cable trenches, cable trays, and cables fixed on walls.

Cable identification device*Standard Configuration
1 pulse generator
Identification clip 1
Identify one receiver
1 power cord
1 grounding wire
Detect 1 wire
Two clips
Specifications and parameters
Identification Generator DSY-2000
Power supply: AC220V 50HZ
Output power: 1KVA
Pulse sequence: 1-sintering car scanning temperature measurement pan tilt 2-second gap modulation
Weight: 4.5Kg
Size: 260 * 180 * 110mm
Identify receiver DSY-2000
Sensitivity: Level 6
Instrument: 0-100mV
Power supply: DC 6V
Weight: 0.5kg
Size: 120 * 65 * 80mm