Built in water tank self-cleaning sterilizer

Built in water tank self-cleaning sterilizerIt is developed and researched by Guorun Environmental Protection Equipment Technology Co., Ltd. in response to the serious situation of long-term retention and frequent invasion and pollution by bacteria and microorganisms in water tanks.Built in self-cleaning sterilizer for water tankWithout using any harmful substances to the human body, ozone is added to the water tank at regular and quantitative intervals. Using the principle of microelectrolysis electrochemical reaction, the dissolved chloride ions and water molecules in the water produce strong oxidizing substances, achieving the effects of purifying, disinfecting, sterilizing, and eliminating algae in the water.

built-inWater self cleaning sterilizerProduct Introduction

The self-cleaning and disinfecting device for water tanks is developed by Guorun Environmental Protection Equipment Technology Co., Ltd. to address the problem of long-term storage in water tanks, frequent invasion and contamination by bacteria and microorganisms. Without using any harmful substances to the human body, ozone is added to the water tank at regular and quantitative intervals. Using the principle of microelectrolysis electrochemical reaction, the dissolved chloride ions and water molecules in the water produce strong oxidizing substances, achieving the effects of purifying, disinfecting, sterilizing, and eliminating algae in the water.

Working principle of built-in 2A water tank self-cleaning sterilizer:

Firstly, place the circulating water tank of the self-cleaning sterilizer in the middle and lower part of the water tank to ensure even water circulation in the tank. When the water level reaches the high water level set by the level gauge, the electric control cabinet starts to start the high-voltage power supply and the strong oxidizing gas generated by the submersible pump through the pipeline to the aeration section; Aeration disinfection is carried out on the water, and at the same time, the submersible pump sends the disinfected water back to the water tank, allowing the stagnant water to circulate. This cycle continues to disinfect the water and ensure its quality. This product has already set the time before leaving the factory, and users do not need to set it again.

Disinfection principle of built-in 2A water tank self-cleaning sterilizer:
The self-cleaning and disinfecting device for water tanks adopts the principle of microelectrolysis. Through electrochemical reactions, the dissolved chloride ions and water molecules in the water produce the following oxidizing substances: hypochlorous acid (HCIO -), chlorine dioxide (CIO2), ozone (O3), reactive oxygen species (O), molecular chlorine (Cl2), etc. The above-mentioned oxidizing substances treat all water in the water tank and pool, as well as the inner walls of the water tank and pool, through diffusion and circulation, destroying bacteria, algae and microbial cells in the water and the inner walls of the water tank and pool, achieving the effect of disinfection and algae elimination.

Built in 2A water tank self-cleaning sterilizer product composition structure:

The GR series water tank self-cleaning sterilizer consists of an electric control cabinet and a circulating water tank. The electric control cabinet is the control system for the power supply parts such as the submersible pump. The circulating water tank is composed of a submersible pump, a suction pipe, a water distributor, and an aeration part, which are connected by pipelines and cables.

Installation and use of built-in 2A water tank self-cleaning disinfectant product

1. Place the circulating water tank in the middle of the bottom of the water tank or pool, and connect the suction pipe;

2. Install the electrical control cabinet in a dry and ventilated area with waterproof and rainproof measures;

3. Connect the cables and gas pipelines between the circulating water tank and the control cabinet;

4. Connect the 220V power supply and the equipment starts working;

5. When the liquid level is below the limit of the liquid level switch, the submersible pump and high-voltage power supply stop working. When the liquid level rises to a certain height, the electric control cabinet will automatically start;

6. When cleaning and maintaining water tanks and pools, first cut off the main power supply of the electrical control cabinet;

7. Before the equipment leaves the factory, the connection part between the circulating water cylinder and the intelligent automatic control cabinet, the air pipe, the submersible pump, and the power cord are provided with lengths of 10 meters each. If there are special circumstances, please inform us in advance.